Specifications

6-9
Cisco Catalyst 4000 Access Gateway Module Installation and Configuration Note
OL-3008-01
Chapter 6 Configuring the 8-Port and 16-Port FXS RJ-21 Modules
Sample Configuration
To display the values configured on the 8-Port RJ-21 FXS module, use the show running-config
command, as follows:
--------------------
gateway# sh running-config
Building configuration...
Current configuration:1062 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname gateway
!
no logging buffered
no logging buffered
logging rate-limit console 10 except errors
!
ip subnet-zero
no ip finger
!
ip audit notify log
ip audit po max-events 100
!
voicecard mode toll-by-pass
!
interface FastEthernet0/0
ip address 172.20.59.93 255.255.0.0
duplex auto
speed auto
!
interface GigabitEthernet0/0
ip address 1.1.1.1 255.255.255.0
no negotiation auto
!
ip default-gateway 172.20.59.1
ip classless
no ip http server
!
call rsvp-sync
!
voice-port 3/0
!
voice-port 3/1
!
voice-port 4/0
!
voice-port 4/1
!
voice-port 4/2
!
voice-port 4/3
!
voice-port 4/4
!
voice-port 4/5
!
voice-port 4/6
!