Datasheet

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 7 of 16

• Remote Monitoring (RMON) software agent to support four RMON groups (history, statistics, alarms, and events) for enhanced traffic

management, monitoring, and analysis

• Support for all nine RMON groups through the use of a Cisco SwitchProbe

analyzer (Switched Port Analyzer [SPAN]) port, which permits

traffic monitoring of a single port, a group of ports, or the entire switch from a single network analyzer or RMON probe

• Analysis support, including ingress port, egress port, and VLAN SPAN

• NetFlow VLAN statistics (Cisco Catalyst 4500 NetFlow Services Card required)

• Layer 2 traceroute

• Remote SPAN (RSPAN)

• Cisco Smartports Macros

• SPAN ACL filtering

• Dynamic Host Configuration Protocol (DHCP) client autoconfiguration

• Enhanced SNMP MIB support

Advanced Security

• TACACS+ and RADIUS, which enable centralized control of the switch and restrict unauthorized users from altering the configuration

• Standard and extended ACLs on all ports

• 802.1x user authentication (with VLAN assignment, port security, and guest VLAN extensions)

• 802.1x accounting

• Trusted boundary

• Router ACLs (RACLs) on all ports (no performance penalty)

• VLAN ACLs (VACLs)

• Port ACLs (PACLs)

• Private VLANs (PVLANs) on access and trunk ports

• DHCP snooping and Option 82 insertion

• Port security

• Sticky port security

• SSHv1 and SSHv2

• VLAN Management Policy Server (VMPS) client

• Unicast MAC filtering

• Unicast port flood blocking

• Dynamic Address Resolution Protocol (ARP) inspection

• IP source guard

• Community private VLAN

CISCO CATALYST 4500 SERIES NETFLOW SERVICES CARD FOR SUPERVISOR ENGINE V

The Cisco Catalyst 4500 NetFlow Services Card is an optional daughter card for the Cisco Catalyst 4500 Series Supervisor Engine IV or V,

providing Layer 3 and 4 statistics and enhanced VLAN statistics without affecting the forwarding performance rates (Figure 2).