Technical information

92
IPSec VPN Acceleration Services Module Installation and Configuration Note
78-14459-03 Rev C0
Configuration Examples
cdp enable
!
interface Vlan1
no ip address
shutdown
!
interface Vlan4
ip address 172.16.31.2 255.255.255.0
standby delay minimum 35 reload 60
standby ip 172.16.31.100
standby timers 1 3
standby preempt
standby name KNIGHTSOFNI
standby track GigabitEthernet1/1
standby track GigabitEthernet1/2
crypto map ha redundancy KNIGHTSOFNI
!
ip classless
ip route 10.11.1.1 255.255.255.255 172.16.31.3
no ip http server
ip pim bidir-enable
!
access-list 101 permit ip host 40.0.0.3 host 10.11.1.1
arp 127.0.0.12 0000.2100.0000 ARPA
!
!
!
line con 0
line vty 0 4
login
transport input lat pad mop telnet rlogin udptn nasi ssh
!
end
Remote Catalyst Switch Configuration
The remote Catalyst switch configuration is as follows:
RemotePeer# show run
Building configuration...
Current configuration : 1674 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname RemotePeer
!
boot system flash sup-bootflash:
!
redundancy
main-cpu
auto-sync standard
ip subnet-zero
!
!
no ip domain-lookup
!
no mls ip multicast aggregate
no mls ip multicast non-rpf cef
!