Technical information

90
IPSec VPN Acceleration Services Module Installation and Configuration Note
78-14459-03 Rev C0
Configuration Examples
no ip address
snmp trap link-status
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,1002-1005
switchport mode trunk
flowcontrol receive on
cdp enable
!
interface Vlan1
no ip address
shutdown
!
interface Vlan4
ip address 172.16.31.1 255.255.255.0
standby delay minimum 35 reload 60
standby ip 172.16.31.100
standby timers 1 3
standby preempt
standby name KNIGHTSOFNI
standby track GigabitEthernet1/1
standby track GigabitEthernet1/2
crypto map ha redundancy KNIGHTSOFNI
!
ip classless
ip route 10.11.1.1 255.255.255.255 172.16.31.3
no ip http server
ip pim bidir-enable
!
access-list 101 permit ip host 40.0.0.3 host 10.11.1.1
arp 127.0.0.12 0000.2100.0000 ARPA
!
!
!
line con 0
line vty 0 4
login
transport input lat pad mop telnet rlogin udptn nasi ssh
!
end
Standby Catalyst Switch Configuration
The standby Catalyst switch configuration is as follows:
StandBy# show run
Building configuration...
Current configuration : 2236 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname StandBy
!
boot system flash sup-bootflash:
!
redundancy
main-cpu
auto-sync standard
ip subnet-zero