Technical information

79
IPSec VPN Acceleration Services Module Installation and Configuration Note
78-14459-03 Rev C0
Configuration Examples
ip address 10.10.20.254 255.255.255.0
!
interface FastEthernet8/3
no ip address
shutdown
.
.
.
!
interface FastEthernet8/47
no ip address
shutdown
!
interface FastEthernet8/48
no ip address
shutdown
!
interface Vlan1
no ip address
shutdown
!
interface Vlan101
ip address 192.168.101.2 255.255.255.0
no mop enabled
crypto map cwan-101
!
ip classless
ip route 172.16.1.101 255.255.255.255 192.168.101.1
no ip http server
no ip http secure-server
!
!
ip access-list extended acl-101
permit ip host 10.10.20.101 host 172.16.1.101
!
!
line con 0
exec-timeout 0 0
line vty 0 4
no login
transport input lat pad mop telnet rlogin udptn nasi ssh
!
end
Frame Relay Ports
Note This section applies to VPN modules running Cisco IOS Release 12.2(14)SY or later releases.
These sections describe Frame Relay port configuration:
• Catalyst Switch 1 (Frame Relay Port), page 80
• Catalyst Switch 2 (Frame Relay Port), page 83