Technical information

68
IPSec VPN Acceleration Services Module Installation and Configuration Note
78-14459-03 Rev C0
Configuration Examples
interface Vlan1
no ip address
shutdown
!
interface Vlan513
ip address 192.168.100.254 255.255.255.0
crypto map MAP-101
!
ip classless
ip route 10.80.1.0 255.255.255.0 192.168.100.253
no ip http server
!
!
ip access-list extended AEO-101
permit ip 10.83.0.0 0.0.255.255 10.80.0.0 0.0.255.255
!
!
line con 0
line vty 0 4
login
!
end
Trunk Ports
These sections describe trunk port configuration:
• Catalyst Switch 1 (Trunk Port), page 68
• Catalyst Switch 2 (Trunk Port), page 71
Note In the following example, the VPN module is installed in slot 5 (Gigabit Ethernet interfaces 5/1 and 5/2).
Catalyst Switch 1 (Trunk Port)
The Catalyst switch 1 configuration is as follows (see Figure 15):
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router-1
!
boot system flash:c6sup22-jk2sv-mz
!
redundancy
main-cpu
auto-sync standard
diagnostic level complete
ip subnet-zero
!
!
no ip domain-lookup
!
ip ssh time-out 120
ip ssh authentication-retries 3
!