Technical information

47
IPSec VPN Acceleration Services Module Installation and Configuration Note
78-14459-03 Rev C0
Configuring a VPN Using the VPN Module
crypto connect vlan 206
!
interface Serial2/0/0/11:0
no ip address
encapsulation ppp
no cdp enable
ppp chap hostname m1
ppp multilink
multilink-group 1
!
interface Serial2/0/0/12:0
no ip address
encapsulation ppp
no cdp enable
ppp chap hostname m1
ppp multilink
multilink-group 1
!
interface Serial2/0/0/13:0
no ip address
encapsulation ppp
no cdp enable
ppp chap hostname m1
ppp multilink
multilink-group 1
!
interface GigabitEthernet5/1
no ip address
flowcontrol receive on
flowcontrol send off
switchport
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,201,206,211,1002-1005
switchport mode trunk
cdp enable
!
interface Vlan206
ip address 192.168.206.1 255.255.255.0
no mop enabled
!
interface Vlan211
ip address 192.168.211.1 255.255.255.0
no mop enabled
!
Crypto Connection for an ATM Port Adapter in the FlexWAN Module
The configuration for this example is as follows:
• The FlexWAN module is in slot 6.
• The ATM port adapter is in bay 0.
• The VPN module is in slot 5.
• VLAN 201—serial2/0/0/1:0 (HDLC)
• VLAN 101—ATM6/0/0.101