Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 10
competitive advantage, providing uncompromised availability and unparalleled protection of the
most valuable business assets.
System Requirements
●
Cisco Traffic Anomaly Detector Module Software Release 5.03 or later.
●
Cisco Catalyst 6500 Series Supervisor Engine 2 with Multilayer Switch Feature Card 2
(MSFC2) or Cisco Catalyst 6500 Series Supervisor Engine 720 (Cisco Catalyst 6500 Series
Supervisor Engine 1 not supported).
●
Switch Fabric Module (SFM) required on the Supervisor Engine 2 to process more than 1
Gbps of traffic.
●
On the Cisco Catalyst 6500 Series switch, IOS support is only upto IOS
®
Software Release
12.2(18)SXE..
●
On the Cisco 7600 Series routers, IOS support is on Software Release 12.2(18)SXE and
also on the 12.2(33)SRA/SRB release.
●
Occupies one slot in a Cisco Catalyst 6500 Series switch or Cisco 7600 Series router.
●
Up to 6 Cisco Traffic Anomaly Detector Modules may be deployed in a single 9 slot
chassis, either protecting the same destinations in load-sharing mode or different
destinations. If deploying Cisco Anomaly Guard Modules and Cisco Traffic Anomaly
Detector Modules in the same chassis, a combined total of eight modules may be installed.
For nonstandard installations, consult the release notes or your Cisco technical support
representative.
●
Redundant supervisor engines must be used in Nonstop Forwarding (NSF) with Stateful
Switchover (SSO) mode (not Route Processor Redundancy [RPR] or RPR+).
Product Specifications
Table 3 provides product specifications for the Cisco Traffic Anomaly Detector Module.
Table 3. Product Specifications
Specification Description
Memory 7 GB DDRAM, 1 GB Compact Flash
Weight
●
Minimum: 3 lb (1.36 kg)
●
Maximum: 5 lb (2.27 kg)
Height 1.18 in. (30 mm)
Width 15.51 in. (394 cm)
Depth 16.34 in. (415 cm)
Power Requirements
●
168 Watts
Operating Temperature 32 to 104°F (0 to 40°C)
Nonoperating Temperature –40 to 167°F (–40 to 75°C)
Humidity 10 to 90 percent, noncondensing
Management
●
Secure Web-based GUI
●
CLI: Console, Telnet, SSH
●
Cisco (Riverhead) SNMP MIB and MIB II
●
TACACS+
●
Syslog
Certifications
●
UL-recognized
●
CE
●
FCC Rules Part 15-compliant