Datasheet

A-56
Catalyst 6500 Series Switches Installation Guide
OL-5781-05
Appendix A Power Supply Specifications
8700 W AC-Input Power Supply
8700 W Power Supply AC Power Cords
Table A-24 lists the specifications for the AC power cords that are available for the 8700 W AC-input
power supply. Included in the table are references to illustrations of the power cords.
TableA-24 8700W Power Supply AC Power Cords
Locale Power Cord
Part Number
Source Plug Type Cordset Rating Power Cord
Reference
Illustration
Australia, New Zealand CAB-AC-16A-AUS= AU20S3 16 A, 250 VAC Figure A-45
People’s Republic of
China
CAB-AC16A-CH= GB16C 16 A, 250 VAC Figure A-36
Continental Europe CAB-AC-2500W-EU= CEE 7/7 16 A, 250 VAC Figure A-40
International CAB-AC-2500W-INT= IEC 309 16 A, 250 VAC Figure A-41
Israel CAB-AC-2500W-ISRL= SI16S3 16 A, 250 VAC Figure A-33
Japan, North America
(nonlocking plug)
200–240VAC operation
CAB-AC-2500W-US1= NEMA 6-20 16 A, 250 VAC Figure A-42
Japan, North America
(locking plug)
200–240VAC operation
CAB-AC-C6K-TWLK= NEMAL6-20 16A, 250VAC Figure A-43
Japan, North America
100–120VAC operation
CAB-7513AC=
1
1. When operating with 100–120VAC, you must use two or three AC power cords and the power supply output is limited to either 2800 W (2 inputs)
or 4200 W (3 inputs).
NEMA 5-20 16 A, 125 VAC Figure A-35
Power Distribution Unit
(PDU
2
2. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the Catalyst 6500 series switch
chassis has a C19 connector; the other end of the cable that plugs into the PDU has a C20 connector.
CAB-C19-CBN= IEC 60320 C19
IEC 60320 C20
16 A, 250 VAC Figure A-46
Switzerland CAB-ACS-16= SEV 5934-2 Type 23 16 A, 250 VAC Figure A-44