Datasheet

A-49
Catalyst 6500 Series Switches Installation Guide
OL-5781-05
Appendix A Power Supply Specifications
8700 W AC-Input Power Supply
The 8700 W power supply cannot be installed in the Catalyst 6503, Catalyst 6503-E, and
Catalyst 6504-E switch chassis.
Figure A-17 8700 W AC-Input Power Supply
8700 W Power Supply Specifications
Table A-22 lists the specifications for the 8700 W AC-input power supply.
Captive installation
screw
Remote power on/off
feature terminal block
Remote power on/off
feature relay switch
Status LEDs
182076
o
INPUT
OK
1 2 3
CISCO SYSTEMS, INC.
FAN
OK
220VAC
OUTPUT
FAI L
1
2
3
DEFAULT
NC RELAY
NO RELAY
Power
switch
Cable
retention
device
AC power
connection 2
AC power
connection 1
AC power
connection 3
System ground studs
Table A-22 8700 W AC-Input Power Supply Specifications
Specification Description
AC-input type 3 AC-inputs per power supply. High-line input with
power factor correction (PFC) included.
Note Power factor correction is a standard feature on
all Catalyst 6500 series AC-input power
supplies. PFC reduces the reactive component
in the source AC current allowing higher power
factors (typically 99 percent or better) and
lower harmonic current components.
AC-input voltage
(One-phase)
• Low-line (120 VAC nominal)—85 VAC (min) to
132 VAC (max)
• High-line (230 VAC nominal)—170 VAC (min) to
264 VAC (max)
AC-input current 16 A each input
kVA rating 10.4 kVA
AC-input frequency 50/60 Hz (nominal) (±3% for full range)