A P P E N D I X A Power Supply Specifications This appendix provides specifications for the Catalyst 6500 series power supplies. Table A-1 lists the currently available Catalyst 6500 series switch power supplies and the power supply description location.
Appendix A Power Supply Specifications Power Supply Compatibility Matrix This appendix also includes a description of power supply redundancy. Note The Catalyst 6500 series switches allow you to mix AC-input and DC-input power supplies in the same chassis. Note Many telco organizations require a –48 VDC power supply to accommodate their power distribution systems. From an operational perspective, the DC-input power supply has the same characteristics as the AC-input version.
Appendix A Power Supply Specifications Power Supply Compatibility Matrix Table A-2 Catalyst 6500 Series Switch Supported Power Supply Configurations (continued) Platform Catalyst 6506-E Catalyst 6509 Catalyst 6509-E Catalyst 6509-NEB Catalyst 6509-NEB-A Catalyst 6513 Supported Power Supplies Restrictions • 2500 W AC-input and DC-input • 3000 W AC-input • 4000 W AC-input and DC-input • 6000 W AC-input • 8700 W AC-input • 1000 W AC-input • 1300 W AC-input, and DC-input • 2500 W AC-i
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W AC-Input and DC-Input Power Supplies The 950 W AC-input (PWR-950-AC) and DC-input (PWR-950-DC) power supplies can be installed in the Catalyst 6503 and Catalyst 6503-E switch chassis only. Due to form factor differences, the 950 W AC-input and DC-input power supplies cannot be installed in any other Catalyst 6500 series switch chassis.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Figure A-3 DC Power Entry Module (PEM) Captive installation screws 79980 Catalyst 6503 DC PEM 950 W Power Supply Specifications Table A-3 lists the specifications for the 950 W AC-input and DC-input power supplies.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Table A-3 950 W AC-Input and DC-Input Power Supplies Specifications (continued) Item Specification Branch circuit requirement (AC-input) Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—15 A • For International—Circuits sized to local and national codes • All Catalyst 6500 series AC-input power supplies require single-phase source AC.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies Table A-3 950 W AC-Input and DC-Input Power Supplies Specifications (continued) Item Output holdup time Heat Dissipation Specification • 20 ms minimum (AC-input power supply) • 4 ms (DC-input power supply) • 4441 BTU/hour (approx.) AC-input power supply • 4632 BTU/hour (approx.) DC-input power supply Front panel LEDs INPUT OK AC-input power supplies: • Green—Source AC voltage is OK.
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W Power Supply AC Power Cords Table A-4 lists the 950 W AC-input power supply AC power cords specifications. These power cords plug into the 950 W PEM(PEM-15A-AC), not directly into the power supply. The table includes references to power cord illustrations. Table A-4 Note All 950 W power supply power cords are 8 feet 2 inches (2.5 meters) in length.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W AC-Input Power Supply The 1000 W AC-input power supply (WS-CAC-1000W) is supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6509 • Catalyst 6509-NEB The 1000 W power supply (shown in Figure A-4) shares the same form factor as the 1300 W, 2500 W, 3000 W, 4000 W, and 6000 W AC-input power supplies.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W Power Supply Specifications Table A-5 lists the specifications for the 1000 W AC-input power supply. Table A-5 1000 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC) Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply Table A-5 1000 W Power Supply Specifications (continued) Specification Description Power supply output capacity 1000 W Power supply output • 15 A @ +3.3 V • 5 A @ +5 V • 6 A @ +12 V • 20.3 A @ +42 V Output holdup time 20 ms minimum Heat Dissipation 4213 BTU/hour (approx.) Front panel LEDs INPUT OK FAN OK OUTPUT FAIL Weight • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.
Appendix A Power Supply Specifications 1000 W AC-Input Power Supply 1000 W Power Supply AC Power Cords Table A-6 lists the specifications for the AC power cords that are available for the 1000 W AC-input power supply. The table includes references to power cord illustrations. Table A-6 Note All 1000 W power supply power cords are 8 feet 2 inches (2.5 meters) in length. Note All 1000 W power supply power cords have an IEC60320/C15 appliance plug at one end.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies 1300 W AC-Input and DC-Input Power Supplies The 1300 W AC-input power supply (WS-CAC-1300W) and 1300 W DC-input power supply (WS-CDC-1300W) are supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6509 • Catalyst 6509-NEB The 1300 W power supply (see Figure A-5 for the 1300 W AC-input power supply and Figure A-6 for the 1300 W DC-input power supply) shares the same form factor as the 10
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies 1300 W Power Supply Specifications Table A-7 lists the specifications for the 1300 W AC-input and DC-input power supplies. Table A-7 1300 W AC-Input and DC-Input Power Supplies Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC).
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies Table A-7 1300 W AC-Input and DC-Input Power Supplies Specifications (continued) Specification Description AC-input frequency 50/60 Hz (nominal) (±3 Hz for full range) Power supply output capacity DC-input voltage DC-input current Power supply output (AC input power supply) Power supply output (DC input power supply) DC input terminal block Output holdup time Heat Dissipation • 1300 W maximum (AC-input) • 1360
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies Table A-7 1300 W AC-Input and DC-Input Power Supplies Specifications (continued) Specification Description Front panel LEDs INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply turned off. DC-input power supplies: FAN OK OUTPUT FAIL Weight • Green—Source DC voltage is OK.
Appendix A Power Supply Specifications 1300 W AC-Input and DC-Input Power Supplies 1300 W Power Supply AC Power Cords Table A-8 lists the specifications for the AC power cords that are available for the 1300 W AC-input power supply. The table includes references to power cord illustrations. Table A-8 Note All 1300 W power supply power cords are 14 feet (4.3 meters) in length. Note All 1300 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply 1400 W AC-Input Power Supply The 1400 W AC-input power supply (PWR-1400-AC) can be installed in the Catalyst 6503 switch and Catalyst 6503-E switch chassis only. Due to form factor differences, the 1400 W AC-input power supply cannot be installed in any other Catalyst 6500 series switch chassis.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply 1400 W Power Supply Specifications Table A-9 lists the specifications for the 1400 W AC-input power supply. Table A-9 1400 W Power Supply Specifications Specification Description AC-input type Autoranging input. Power Factor Correction (PFC) included. Note AC-input voltage AC-input current Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-9 1400 W Power Supply Specifications (continued) Specification Description AC-input frequency 50/60 Hz (nominal) (±3 Hz for full range) Power supply output capacity 1400 W Power supply output • 15 A @ +1.5 V • 2.5 A @ +3.3 V • 27.4 A @ +50 V Output holdup time 20 ms minimum Heat dissipation 5976 BTU/hour (approx.) Front panel LEDs INPUT OK FAN OK OUTPUT FAIL Weight • Green—Source AC voltage is OK.
Appendix A Power Supply Specifications 1400 W AC-Input Power Supply Table A-10 1400 W Power Supply AC Power Cords Locale Power Cord Part Number Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7513ACR= IRAM 2073 10 A, 250 VAC Figure A-30 Australia, New Zealand CAB-7513ACA= SAA AS 3112 15 A, 250 VAC Figure A-31 People’s Republic of China CAB-AC16A-CH= GB16C 16 A, 250 VAC Figure A-36 Continental Europe CAB-7513ACE= CEE 7/7 16 A, 250 VAC Figure A-32 CA
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies 2500 W AC-Input and DC-Input Power Supplies The 2500 W AC-input power supply (WS-CAC-2500W) and 2500 W DC-input power supply (WS-CDC-2500W) are supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6513 The 2500 W power supplies, shown in Figure A-9 and Figure A-10, share the same form
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Figure A-10 2500 W DC-input Power Supply 16030 Terminal block cover o INPUT OK FAN OK OUTPUT FAIL Captive installation screw 2500 W Power Supply Specifications Table A-11 lists the specifications for the 2500 W AC-input and DC-input power supplies. Table A-11 2500 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC).
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-11 2500 W Power Supply Specifications (continued) Specification Description Branch circuit requirement (AC-input) Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits sized to local and national codes • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-11 2500 W Power Supply Specifications (continued) Specification Power supply output (AC supply) Description • 100/120 VAC operation – 15.5 A @ +3.3 V – 5 A @ +5 V – 10 A @ +12 V – 27.5 A @ +42 V • 200/240 VAC operation – 15 A @ +3.3 V – 5 A @ +5 V – 10 A @ +12 V – 55.5 A @ +42 V Power supply output (DC supply) DC input terminal block Output holdup time Heat dissipation • 15 A @ +3.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies Table A-11 2500 W Power Supply Specifications (continued) Specification Description Front panel LEDs INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. DC-input power supplies: FAN OK OUTPUT FAIL Weight • Green—Source DC voltage is OK. (Input voltage is –40.
Appendix A Power Supply Specifications 2500 W AC-Input and DC-Input Power Supplies 2500 W Power Supply AC Power Cords Table A-12 lists the specifications for the AC power cords that are available for the 2500 W AC-input power supply. The table includes references to power cord illustrations. Table A-12 Note All 2500 W power supply power cords are 14 feet (4.3 meters) in length. Note All 2500 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W AC-Input and DC-Input Power Supplies The 2700 W AC-input power supply (PWR-2700-AC/4) and 2700 W DC-input power supply (PWR-2700-DC/4) are supported only in the Catalyst 6504-E switch. See Figure A-11 for the 2700 W AC-input power supply and Figure A-12 for the 2700 W DC-input power supply. Note The 2700 W AC-input power supply needs 220 VAC to deliver 2700 W of power.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Figure A-12 2700 W DC-input Power Supply 1 2 3 PWR-2 700-DC /4 INPUT 1 INP UT2 OK FAN OU OK 48V-60V TPUT OK FAIL =40A 48V-60V =40A -VE-1 -VE-1 -VE-2 -VE-2 6 5 8 132219 ALL FA ST PRIOR ENERS MU ST TO OP ERATING BE FULLY ENGA THE PO WER SU GED PPLY 4 11 9 10 7 1 Captive installation screw 7 Cable holder cover 2 DC power cable terminal block 8 Cable holder 3 Status LEDs 9 Tie-wrap 4 DC power cabl
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W Power Supply Specifications Table A-11 lists the specifications for the 2700 W AC-input and DC-input power supplies. Table A-13 2700 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC).
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Table A-13 2700 W Power Supply Specifications (continued) Specification Power supply output capacity System power dissipation DC-input voltage DC-input current (per DC input) Description • 1350 W maximum (100–120 VAC) • 2700 W maximum (200–240 VAC) • 1350 W maximum (–48 to –60 VDC, with one DC input) • 2700 W maximum (–48 to –60 VDC, with two DC inputs) • 3.4 KVA (high-line operation; AC-input) • 3.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies Table A-13 2700 W Power Supply Specifications (continued) Specification Output holdup time Heat dissipation Description • 20 ms minimum (AC-input power supply) • 4 ms (DC-input power supply) • 11,238 BTU/hour (approx.) AC-input power supply • 11,968 BTU/hour (approx.
Appendix A Power Supply Specifications 2700 W AC-Input and DC-Input Power Supplies 2700 W Power Supply AC Power Cords Table A-12 lists the specifications for the AC power cords that are available for the 2700 W AC-input power supply. The table includes references to power cord illustrations. Table A-14 Note All 2700 W power supply power cords are 14 feet (4.3 meters) in length. Note All 2700 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W AC-Input Power Supply The 3000 W AC-input power supply (WS-CAC-3000W) is supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6513 The 3000 W power supply (see Figure A-13) shares the same form factor as the 1000 W, 1300 W, 2500 W, 4000 W, and 6000 W AC-input power supplies.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W Power Supply Specifications Table A-15 lists the specifications for the 3000 W AC-input power supply. Table A-15 3000 W Power Supply Specifications Specification Description AC-input type Autoranging input with power factor correction (PFC). Note AC-input voltage AC-input current Branch circuit requirement (AC-input) Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply Table A-15 3000 W Power Supply Specifications (continued) Specification Description System power dissipation 3520 W (total input power) or 3.6 KVA (high-line operation) Power supply output • 100/120 VAC operation – 25.0 A @ +3.3 V – 5 A @ +5 V – 12 A @ +12 V – 27.89 A @ +42 V • 200/240 VAC operation – 25.0 A @ +3.3 V – 5 A @ +5 V – 12 A @ +12 V – 65.
Appendix A Power Supply Specifications 3000 W AC-Input Power Supply 3000 W Power Supply AC Power Cords Table A-16 lists the specifications for the AC power cords that are available for the 3000 W AC-input power supply. The table includes references to power cord illustrations. Table A-16 Note All 3000 W power supply power cords are 14 feet (4.3 meters) in length. Note All 3000 W power supply power cords have an IEC60320/C19 appliance connector at one end.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies 4000 W AC-Input and DC-Input Power Supplies The 4000 W AC-input and DC-input power supplies, (WS-CAC-4000W-US, WS-CAC-4000W-INT, and PWR-4000-DC) are supported in the following Catalyst 6500 series switches: • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6513 The 4000 W AC-input and DC-input power supplies, shown in Figure A-14 and Figu
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Figure A-15 4000 W DC-Input Power Supply + VE-1 + VE-3 -VE-1 -VE-3 + VE-2 97297 -VE-2 I 0 INPUT OK 1 2 3 FAN OUTPUT OK FAIL 4000 W Power Supply Specifications Table A-17 lists the specifications for the 4000 W AC-input and DC-input power supplies.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-17 4000 W AC-Input and DC-Input Power Supplies Specifications (continued) Specification Description Branch circuit requirement (AC-input) Each chassis power supply should have its own dedicated, fused-branch circuit: • For North America—30 A • For International—Circuits should be sized according to local and national codes • All AC power supply inputs are fully isolated.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-17 4000 W AC-Input and DC-Input Power Supplies Specifications (continued) Specification Power supply output capacity Description • 4000 W with three inputs active • 2700 W with two inputs active Note kVA rating The 4000 W power supply cannot operate with only one source DC-input connected. 5.
Appendix A Power Supply Specifications 4000 W AC-Input and DC-Input Power Supplies Table A-17 4000 W AC-Input and DC-Input Power Supplies Specifications (continued) Specification Description Front panel LEDs INPUT OK AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. DC-input power supplies: FAN OK OUTPUT FAIL Weight • Green—Source DC voltage is OK.
Appendix A Power Supply Specifications 6000 W AC-Input Power Supply 6000 W AC-Input Power Supply The 6000 W AC-input (WS-CAC-6000W) power supply is supported in the following Catalyst 6500 series switches: Note • Catalyst 6506 • Catalyst 6506-E • Catalyst 6509 • Catalyst 6509-E • Catalyst 6509-NEB • Catalyst 6509-NEB-A • Catalyst 6513 When the 6000 W AC-input power supply is installed in a Catalyst 6506, Catalyst 6509, Catalyst 6509-NEB, or Catalyst 6509-NEB-A chassis, the power supply out
Appendix A Power Supply Specifications 6000 W AC-Input Power Supply 6000 W Power Supply Specifications Table A-19 lists the specifications for the 6000 W AC-input power supply. Table A-19 6000 W AC-Input Power Supply Specifications Specification Description AC-input type 2 AC-inputs per power supply. High-line input with power factor correction (PFC) included. Note AC-input voltage Power factor correction is a standard feature on all Catalyst 6500 series AC-input power supplies.
Appendix A Power Supply Specifications 6000 W AC-Input Power Supply Table A-19 6000 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output capacity The 6000 W power supply can operate at either 2900 W or 6000 W depending on the number of AC power cords attached and the source AC voltage. Note • The 6000 W AC-input power supply is limited to 4000 W maximum output when it is installed in a Catalyst 6506, Catalyst 6509, or Catalyst 6509-NEB switch chassis.
Appendix A Power Supply Specifications 6000 W AC-Input Power Supply Table A-19 6000 W AC-Input Power Supply Specifications (continued) Specification Description Branch circuit requirement (AC-input) Each power supply input should have its own dedicated, fused-branch circuit: • For North America—20 A • For International—Circuits should be sized according to local and national codes • All Catalyst 6500 series AC-input power supplies require single-phase source AC.
Appendix A Power Supply Specifications 6000 W AC-Input Power Supply Table A-19 6000 W AC-Input Power Supply Specifications (continued) Specification Description Front panel LEDs INPUT OK 1 and INPUT OK 2 FAN OK OUTPUT FAIL Weight • Green—Source voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. • Green—Power supply fan is operating properly. • Off—Power supply fan failure is detected.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-20 6000 W Power Supply AC Power Cords (continued) Locale Power Cord Part Number Source Plug Type Cordset Rating Power Cord Reference Illustration NEMA L6-20 16 A, 250 VAC Figure A-43 NEMA 5-20 16 A, 125 VAC Figure A-35 Power Distribution Unit CAB-C19-CBN= (PDU3 IEC 60320 C19 16 A, 250 VAC Figure A-46 Switzerland SEV 5934-2 Type 23 16 A, 250 VAC Figure A-44 Japan, North America CAB-AC-C6K-TWLK= (locking plug)
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply The 8700 W power supply cannot be installed in the Catalyst 6503, Catalyst 6503-E, and Catalyst 6504-E switch chassis. Figure A-17 8700 W AC-Input Power Supply System ground studs Cable retention device AC power connection 1 AC power connection 2 Power switch Status LEDs INPUT OK o 1 2 FAN OK 182076 AC power connection 3 NC RELAY OUTPUT FAIL 3 1 220VAC 2 3 DEFAULT NO RELAY CISCO SYSTEMS, INC.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-22 8700 W AC-Input Power Supply Specifications (continued) Specification Description Power supply output capacity The power supply output capacity is dependent on the number of AC power cords (1, 2, or 3) attached and the source AC voltage (110 VAC or 220 VAC) applied to the power supply inputs.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-22 8700 W AC-Input Power Supply Specifications (continued) Specification 5800 W operation 8700 W operation Description 5800 W maximum with the following combinations of power cords and source AC voltage applied to the power supply inputs: • Two AC inputs are connected to high-line (220 VAC nominal); the third AC input is connected to low-line (110 VAC nominal).
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-22 8700 W AC-Input Power Supply Specifications (continued) Specification Power supply output Description • 2800 W operation – 25.0 A @ +3.3 V – 12.0 A @ +12 V – 61.29 A @ +42 V • 4200 W operation – 25.0 A @ +3.3 V – 12.0 A @ +12 V – 94.62 A @ +42 V • 5800 W operation – 25.0 A @ +3.3 V – 12.0 A @ +12 V – 132.71 A @ +42 V • 8700 W operation – 25.0 A @ +3.3 V – 12.0 A @ +12 V – 201.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-22 8700 W AC-Input Power Supply Specifications (continued) Specification Description Front panel LEDs INPUT OK 1, INPUT OK 2, and INPUT OK 3 220VAC 1, 2, and 3 FAN OK OUTPUT FAIL • Green—Source voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the power supply is turned off. • Green—High-line AC is present on the respective AC inputs.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Figure A-18 Remote Power On/Off Feature Components 8700 Watt power supply Relay controller Remote power on/off terminal block Relay controller power Network Ferrite bead 181878 Relay controller box switch Terminal Block The terminal block has three contacts labeled 1, 2, and 3. Two control wires from an external relay controller box attach to either positions 1 and 2 or positions 2 and 3.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply Table A-23 8700 W Power Supply Relay Controller Switch Settings and Operation External Relay Controller Box Relay Type Power Supply Relay Controller Switch Setting Power Supply Terminal Block Positions Used Normally open (NO) relay NO RELAY (DEFAULT) Control wires from the external relay controller box attach to terminal block positions 1 and 2 Normally closed (NC) NC RELAY relay No relay attached.
Appendix A Power Supply Specifications 8700 W AC-Input Power Supply 8700 W Power Supply AC Power Cords Table A-24 lists the specifications for the AC power cords that are available for the 8700 W AC-input power supply. Included in the table are references to illustrations of the power cords.
Appendix A Power Supply Specifications AC Power Cord Illustrations AC Power Cord Illustrations This section contains the AC power cord illustrations. Note that an AC power cord may be used with several power supplies. See the power supply specifications tables for the correct AC power cord illustrations for your power supply. Figure A-19 CAB-AC10A-90L-AU= Plug: SAA AS 3112 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-21 CAB-AC10A-90L-IT= Plug: CEI 23-16/7 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113343 Connector: IEC 60320 C15 Figure A-22 CAB-AC15A-90L-US= Plug: NEMA 5-15 Cordset rating: 15 A, 125 V Length: 8 ft 2 in. (2.5 m) 113344 Connector: IEC 60320 C15 Figure A-23 CAB-AC10A-90L-UK= Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-24 CAB-7KACR= Plug: IRAM 2073 Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 113346 Connector: IEC 60320 C15 Figure A-25 CAB-7KACA= Cordset rating: 15 A, 250 V Length: 8 ft 2 in. (2.5 m) Connector: IEC 60320 C15 113347 Plug: SAA AS 3112 Figure A-26 CAB-7KACE= 113348 Plug: CEE 7/7 Cordset rating: 16 A, 250 V Length: 8 ft 2 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-27 CAB-7KACI= Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: CEI 23-16/7 113349 Connector: IEC 60320 C15 Figure A-28 CAB-7KAC-15= Plug: NEMA 5-15 Cordset rating: 15 A, 125 V Length: 8 ft 2 in. (2.5 m) 113350 Connector: IEC 60320 C15 Figure A-29 CAB-7KACU= 13A fuse Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-30 CAB-7513ACR= Plug: IRAM 2073 Cordset rating: 10 A, 250 V Length: 14 ft 0 in. (4.26 m) 113352 Connector: IEC 60320 C19 Figure A-31 CAB-7513ACA= Plug: SAA AS 3112 Cordset rating: 15 A, 250 V Length: 14 ft 0 in. (4.26 m) 113353 Connector: IEC 60320 C19 Figure A-32 CAB-7513ACE= Plug: CEE 7/7 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-33 CAB-AC-2500W-ISRL Plug: SI16S3 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 130113 Connector: IEC 60320 C19 Figure A-34 CAB-7513ACI= Plug: CEI 23-16/7 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113355 Connector: IEC 60320 C19 Figure A-35 CAB-7513AC= Plug: NEMA 5-20 Cordset rating: 20 A, 125 V Length: 14 ft 0 in. (4.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-36 CAB-AC16A-CH= Connector: IEC 60320-1 C19 126792 Plug: GB16C Cordset rating: 16A, 250V Length: 14 ft 0 in. (4.26 m) Figure A-37 CAB-7513ACSA= Plug: IEC 884 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113357 Connector: IEC 60320 C19 Figure A-38 CAB-ACS-10= Plug: SEV 1011 Cordset rating: 10 A, 250 V Length: 7 ft 0 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-39 CAB-7513ACU Plug: BS 1363 113359 13A replaceable fuse Cordset rating: 13 A, 250 V Length: 14 ft 0 in. (4.26 m) Connector: IEC 60320 C19 Figure A-40 CAB-AC-2500W-EU Plug: CEE 7/7 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113360 Connector: IEC 60320 C19 Figure A-41 CAB-AC-2500W-INT= Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-42 CAB-AC-2500W-US1= Plug: NEMA 6-20 Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) 113362 Connector: IEC 60320 C19 Figure A-43 CAB-AC-C6K-TWLK= Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) Connector: IEC 60320 C19 113363 Plug: NEMA L6-20 Figure A-44 CAB-ACS-16= Cordset rating: 16 A, 250 V Length: 8 ft 2 in. (2.
Appendix A Power Supply Specifications AC Power Cord Illustrations Figure A-45 CAB-AC-16A-AUS= Cordset rating: 16 A, 250 V Length: 14 ft 0 in. (4.26 m) Plug: AU20S3 140586 Connector: IEC 60320 C19 CAB-C19-CBN= Connector: IEC 60320 C20 Connector: IEC 60320 C19 WS-CAC-4000W-INT= Cordset rating: 32 A, 250 V Length: 12 ft 0 in. (3.65 m) Plug: IEC 60309 Hardwired to power supply 113365 Figure A-47 Cordset rating: 16 A, 250 V Length: 9 ft 0 in. (2.
Appendix A Power Supply Specifications Power Supply Redundancy WS-CAC-4000W-US= Cordset rating: 30 A, 250 V Length: 12 ft 0 in. (3.65 m) Plug: NEMA L6-30 Hardwired to power supply 113366 Figure A-48 Power Supply Redundancy Catalyst 6500 series switching modules have different power requirements. Depending upon the wattage of the power supply, certain switch configurations might require more power than a single power supply can provide.
Appendix A Power Supply Specifications Power Supply Redundancy Table A-25 Power Supply Redundancy (continued) If you have two power supplies of and redundancy is Then Unequal wattage Enabled Both power supplies initially come online. For the Catalyst operating system, if the difference between the two power supply’s output wattage is less than 10% of the higher output wattage power supply, redundancy is enabled. If the difference is greater than 10%, the lesser wattage power supply is disabled.
Appendix A Power Supply Specifications Power Supply Redundancy Table A-26 Effects of Power Supply Configuration Changes (continued) Configuration Change Higher wattage power supply is inserted with redundancy enabled Lower wattage power supply is inserted with redundancy enabled Higher or lower wattage power supply is inserted with redundancy disabled Power supply is removed with redundancy enabled Effect • System log and syslog messages are generated.
Appendix A Power Supply Specifications Power Supply Redundancy Note When running redundant 4000 W power supplies in Catalyst 6506 and Catalyst 6509 non-E series systems, if you remove the power supply in bay 1, the total system power will be reduced to 2940 W after 300 seconds (5 minutes). You can avoid this reduction in the total system power by leaving the 4000 W power supply in bay 1, even in a powered down state.
Appendix A Power Supply Specifications Power Supply Redundancy Note In systems that are equipped with two power supplies, if one power supply fails and the other power supply cannot fully power all of the installed modules, system power management will shut down devices in the following order: • Power over Ethernet (PoE) devices— The system will power down PoE devices in descending order, starting with the highest numbered port on the module in the highest numbered slot.
Appendix A Power Supply Specifications Power Supply Redundancy Catalyst 6500 Series Switches Installation Guide A-72 OL-5781-05
