Specifications

xix
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-02
Preface
Audience
This guide is for the networking professional using the Cisco IOS command-line interface (CLI) to
manage the standalone Cisco Catalyst Blade Switch 3120 for HP or blade switch stack, referred to as the
switch. Before using this guide, you should have experience working with the Cisco IOS commands and
the switch software features. Before using this guide, you should have experience working with the
concepts and terminology of Ethernet and local area networking.
You install the switch in the HP BladeSystem server chassis, referred to as the enclosure.
Note on WS-CBS3125G-S and WS-CBS3125X-S switch models:
• The WS-CBS3125G-S is the same product as the WS-CBS3120G-S.
• The WS-CBS3125X-S is the same product as the WS-CBS3120X-S.
The functionality and the performance of WS-CBS3125 switches are same as those of WS-CBS3120
switches. All Cisco Catalyst Blade Switch 3120/3125 for HP models are HP BladeSystem c-Class
compatible.
Purpose
This guide provides the information that you need about the Layer 2 and Layer 3 commands that have
been created or changed for use with the switches. For information about the standard Cisco IOS
Release
12.2 commands, see the Cisco IOS documentation set available from the Cisco.com home page by
selecting Technical Support & Documentation > Cisco IOS Software.
This guide does not provide procedures for configuring your switch. For detailed configuration
procedures, see the software configuration guide for this release.
This guide does not describe system messages you might encounter. For more information, see the
system message guide for this release.
For documentation updates, see the release notes for this release.