Datasheet

CAB-
7513AC
Catalyst 4500/4000 Series Switch Power Supplies and Cables
Refer to the Power Connection Guidelines for AC-Powered Systems section in Catalyst 4500 Series
Hardware Installation Guide - Preparing for Installation for the list of Power supplies, cables and the
corresponding part numbers.
Refer to Catalyst 4000 Series Installation Guide - Site Planning
for the list of Catalyst 4000 Power supplies,
cables and the corresponding part numbers.
Catalyst 2900/3500XL, 2940, 2950, 3550 and 3750 Series Switch Power Supplies and Cables
Catalyst 2900/3500, 2940, 2950, 3550 and 3750 switches require standard 110V, 15 Amp AC input Power.
Refer to these Hardware Installation Guides for the detailed power specifications:
• Catalyst 3750 Switch Hardware Installation Guide
• Catalyst 3550 Multilayer Switch Hardware Installation Guide
• Catalyst 2950 Switch Hardware Installation Guide
Catalyst 2900/3500XL, 2940, 2950, 3550 and 3750
Power
Supply Part
Number
Power
Cord
Part
Number
Connector Type
Power
Installation
Guidelines
Internal non-
replaceable
AC power
supply
CAB-
AC=
N/A
RJ-21 to RJ-45 Pin-Out Pattern
All Catalyst family 10/100TX telco switching modules incorporate industry-standard RJ-21 connectors and
require compatible Category 5 cabling systems to achieve 100 Mbps data rates.
Category 5 telco cables can be ordered directly from Cisco. Refer to Cisco.com for ordering information.
This is the information on Cisco part numbers.
Model Number Description
CAB-5-
M180M120-10=
10 foot, male 180 degree to male 120
degree, Category 5 telco cable