Installation guide

6
Release Notes for Catalyst5000 Family Software Release4.x
OL-2306-01
Product and Software Version Matrix
Product and Software Version Matrix
This section contains configuration matrixes to help you order Catalyst5000 family products. Table3
lists the minimum supervisor engine version and the current recommended supervisor engine version for
Catalyst5000 family modules and chassis.
Note There might be additional minimum software version requirements for intelligent modules (those
that run an additional, separate software image). Refer to the software release notes for the module
type for more information.
Table3 Product and Software Version Matrix
Product Number
(append with “=” for
spares) Product Description
Minimum Supervisor
Engine Software Version
Recommended Supervisor
Engine Software Version
SupervisorEngine I
WS-X5005 Supervisor Engine I, dual-port
100BASE-FX SMF uplinks
1.1 4.5(13a)
WS-X5006 Supervisor Engine I, dual-port
100BASE-FX MMF uplinks
WS-X5009 Supervisor Engine I, dual-port
100BASE-TX RJ-45/MII uplinks
SupervisorEngine II
WS-X5505 Supervisor Engine II, dual-port
100BASE-FX SMF uplinks
2.2(1) 4.5(13a)
WS-X5506 Supervisor Engine II, dual-port
100BASE-FX MMF uplinks
WS-X5509 Supervisor Engine II, dual-port
100BASE-TX RJ-45/MII uplinks
Supervisor Engine IIG
WS-X5540 Supervisor Engine IIG base module 5.1(1a) 5.1(1a)
Supervisor Engine III
WS-X5530-E1 Supervisor Engine III base module 3.1(1) 4.5(13a)
WS-X5530-E2 Supervisor Engine III base module with
NFFC
1
4.1(1) 4.5(13a)
WS-X5530-E2A Supervisor Engine III base module with
enhanced NFFC
4.5(4) 4.5(13a)
WS-X5530-E3 Supervisor Engine III base module with
NFFCII
4.3(1a) 4.5(13a)
WS-X5530-E3A Supervisor Engine III base module with
enhanced NFFCII
4.5(4) 4.5(13a)