Datasheet

Switch Configurations

All switches ship with one of the four power supplies (350W or 715W AC or 1100W AC or 440W DC). Figure 1

shows the Cisco Catalyst 3850 Series Switches (front and back).

Figure 3. Cisco Catalyst 3850 Series Switches

Table 1 shows the Cisco Catalyst 3850 Series configurations.

Table 1. Cisco Catalyst 3850 Series Configurations

Models Total 10/100/1000 Ethernet Ports Default AC Power Supply Available PoE Power

WS-C3850-24T 24

WS-C3850-48T 48

350W -

WS-C3850-24P 24 PoE+

WS-C3850-48P 48 PoE+

715W 435W

WS-C3850-48F 48 PoE+ 1100W 800W

WS-C3850-24U 24 UPOE 1100WAC 800W

WS-C3850-48U 48 UPOE 1100WAC 800W

Licensing for Cisco Catalyst 3850 Series Switches

The three feature sets available with all Cisco Catalyst 3850 Series Switches are:

●

LAN Base: Enterprise access layer 2 switching features

●

IP Base: Enterprise access layer 3 switching features

●

IP Services: Advanced enterprise layer 3 switching (IPv4 and IPv6) features

The LAN Base feature set offers enhanced intelligent services that include comprehensive Layer 2 features, with

up to 256 VLANs. The IP Base feature set provides entry-level enterprise services in addition to all LAN Base

features, with 1K VLANs. IP Base also includes the support for wireless controller functionality, routed access,

Smart Operations, and Flexible Netflow. The IP Services feature set provides full enterprise services that include

advanced Layer 3 features such as Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path

First (OSPF), Border Gateway Protocol (BGP), Protocol Independent Multicast (PIM), and IPv6 routing such as

OSPFv3 and EIGRPv6. All software feature sets support advanced security and Modular Quality of Service

(MQC)-based QoS.

The Cisco Catalyst 3850 Series Switches with LAN Base feature set can only stack with other Cisco Catalyst 3850

Series LAN Base switches. The same applies to IP Base and IP Services as well. A mixed stack of LAN Base

switches with IP Base or IP Services is not supported.