Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 35 of 36
Fans
The Cisco XPS 2200 has 3 field-replaceable fan modules (XPS-2200-FAN).
Table 27 describes the fan module for the XPS2200.
Table 27. Cisco XPS 2200 Fan module dimensions and weight
Dimensions (H x W x D) Weight
Inches Centimeters Pounds Kilograms
XPS2200 Fan Module 1.59 x 1.59 x 4.24 4.04 x 4.04 x 10.77 .13 .06
●
System fan modules offer up to 24 cubic feet per minute (CFM) under full load at ambient temperature of
45°C and altitude of 3000 meters
Indicators
Table 28 describes the indicator options for the XPS2200
Table 28. Cisco XPS 2200 Indicators
RPS Mode- 9 port
associated LEDs
●
Solid Green when in RPS mode and able to backup this Port
●
Blinking Green when actively backing up Port
●
Solid Amber indicates backup not available for this Port
●
Blinking Amber for any port faults
SP Mode- 9 port
associated LEDs
●
Solid Green when in SP mode and there are no issues
●
Blinking Green not defined
●
Solid Amber indicates that SP port off-line (No Power Output)
●
Blinking Amber for any port faults
Combined function (SP
and RPS) LEDs
●
Blinking Amber on both RPS and SP LEDs indicates cable fault (short, etc.)
●
Both RPS and SP ports alternate Green/Amber when selected via push button
●
18 Port LEDs for new features with more comprehensive single look status assessment
System LEDs - Front of
System
●
System
Solid Green - Normal operation with no faults
Blinking Green during boot
Solid Amber - Temperature faults, cable faults, port faults, power supply faults, fan faults
Blinking Amber during software updates
●
Fan
Use one Fan LED, amber when any one fan fails, green when all OK
Each FRU Fan (3) will have an associated Status LED (green=working, amber=failed), but no silkscreen on front
panel
●
Temp
Green - No Problems. Amber - Over Temperature
●
FEP (PS1 & PS2)
Solid Green - Stack Power Mode OK
Blinking Green - RPS Mode OK
Solid Amber - Stack Power Mode Faulty
Power Supply Specifications
The XPS 2200 uses the same power supplies as the Cisco Catalyst 3750-X and 3560-X Series Switches. Refer to
Table 12 for the power specifications for each type of power supply that is usable in the XPS 2200 as well as the
Cisco Catalyst 3750-X and 3560-X Series Switches.