Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 36
Standalone Switches
Figure 2 shows Cisco Catalyst 3560-X Series Switches.
Figure 2. Cisco Catalyst 3560-X Series Switches
Table 2 shows the Cisco Catalyst 3560-X Series configurations.
Table 2. Cisco Catalyst 3560-X Series Configurations
Feature Set Models Total 10/100/1000
Ethernet Ports
Default AC Power Supply Available PoE Power
WS-C3560X-24T-L 24
WS-C3560X-48T-L 48
350W -
WS-C3560X-24P-L 24 PoE+
WS-C3560X-48P-L 48 PoE+
715W 435W
LAN Base
WS-C3560X-48PF-L 48 PoE+ 1100W 800W
WS-C3560X-24T-S 24
WS-C3560X-48T-S 48
350W -
WS-C3560X-24P-S 24 PoE+
WS-C3560X-48P-S 48 PoE+
715W 435W
IP Base
WS-C3560X-48PF-S 48 PoE+ 1100W 800W
Cisco Catalyst 3750-X and 3560-X Series Software
In addition to IP Base and IP Services feature sets, the Cisco Catalyst 3750-X and 3560-X Series come with a new
LAN Base feature set. The three feature sets available with all Cisco Catalyst 3750-X and 3560-X Series Switches
are:
●
LAN Base: Enhanced Intelligent Services
●
IP Base: Baseline Enterprise Services
●
IP Services: Enterprise Services
The LAN Base feature set offers enhanced intelligent services that includes comprehensive Layer 2 features, with
up-to 255 VLANs. The IP Base feature set provides baseline enterprise services in addition to all LAN Base
features, with 1K VLANs. IP Base also includes the support for routed access, StackPower (available only on the
Catalyst 3750-X), MACsec, and the new Cisco Service Module. The IP Services feature set provides full enterprise
services that includes advanced Layer 3 features such as Enhanced Interior Gateway Routing Protocol (EIGRP),
Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), Protocol Independent Multicast (PIM), and
IPv6 routing such as OSPFv3 and EIGRPv6. All software feature sets support advanced security, QoS, and
management features.