Datasheet

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 37
Feature Set Models Total 10/100/1000
Ethernet Ports
Default AC Power Supply Available PoE Power
WS-C3560X-24T-E 24
WS-C3560X-48T-E 48
350W -
WS-C3560X-24P-E 24 PoE+
WS-C3560X-48P-E 48 PoE+
715W 435W
WS-C3560X-48PF-E 48 PoE+ 1100W 800W
WS-C3560X-24U-E 24 UPOE 1100W 800W
IP Services
WS-C3560X-48U-E 48 UPOE 1100W 800W
Cisco Catalyst 3750-X and 3560-X Series Software
In addition to IP Base and IP Services feature sets, the Cisco Catalyst 3750-X and 3560-X Series come with a new
LAN Base feature set. The three feature sets available with all Cisco Catalyst 3750-X and 3560-X Series Switches
are:
●
LAN Base: enterprise access Layer 2 switching features
●
IP Base: baseline enterprise access Layer 3 switching features
●
IP Services: advanced Layer 3 switching (IPv4 and IPv6) features
The LAN Base feature set includes comprehensive Layer 2 features, with up-to 255 VLANs. The IP Base feature
set provides baseline enterprise services in addition to all LAN Base features, with 1K VLANs. IP Base also
includes the support for routed access, StackPower (available only on the Catalyst 3750-X), MACsec, and the new
Cisco Service Module. The IP Services feature set provides full enterprise services that includes advanced Layer
3 features such as Enhanced Interior Gateway Routing Protocol (EIGRP), Open Shortest Path First (OSPF),
Border Gateway Protocol (BGP), Protocol Independent Multicast (PIM), and IPv6 routing such as OSPFv3 and
EIGRPv6. All software feature sets support advanced security, QoS, and management features.
The Cisco Catalyst 3750-X Series Switches with LAN Base feature set can only stack with other Cisco Catalyst
3750-X Series LAN Base switches. A mixed stack of LAN Base switch with IP Base or IP Services features set is
not supported.
Customers can transparently upgrade the software feature set in the Cisco Catalyst 3750-X and 3560-X Series
Switches through Cisco IOS
®
Software activation. Software activation authorizes and enables the Cisco IOS
Software feature sets. A special file contained in the switch, called a license file, is examined by Cisco IOS
Software when the switch is powered on. Based on the license’s type, Cisco IOS Software activates the
appropriate feature set. License types can be changed, or upgraded, to activate a different feature set. For
detailed information about Software Activation, visit
http://www.cisco.com/go/sa.