Datasheet

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 34 of 37
XPS 2200 Performance Specifications
Table 21 lists the performance specifications for the power supplies.
Please note that the same power supplies used in the 3750-X and 3560-X are all usable in the XPS-2200 (please
refer to Table 12).
Table 21. XPS 2200 Performance Specifications
Performance Numbers for XPS 2200
Total Power Sharing Capability (Stack Power Mode, 9 Switches and 20 total 1100W power supplies) 22kW
Maximum Power Back-up Capability (RPS Mode, 2x1100W power supplies in XPS 2200) 2200W
Nominal Voltage 56V
Nominal Maximum Current per Port (input or output) 40A
Flash 8MB
Heat Dissipation
Table 22 provides heat dissipation information for the Cisco XPS 2200.
Table 22. Heat Dissipation
Heat Dissipation Cisco XPS 2200 Power Supply
Configuration
No Load (BTU/hr) Full Load (BTU/hr)
1 x 350WAC 120 480
2 x 350WAC 160 665
1 x 715WAC 155 610
2 x 715WAC 205 920
1 x 1100WAC 155 825
2 x 1100WAC 205 1350
1 x 440WDC 115 645
2 x 440WDC 155 990
Physical and Environmental Specifications
Table 23 lists the physical and environmental specifications for XPS-2200.
Table 23. Physical and Environmental Specifications
Description Specification
Physical specifications H x W x D:
1.73 x 17.5 x 20.5 in.
(4.4 x 44.5 x 52.1 cm)
Weight:
19.8 lb (9.0 kg)
Total input BTU (1000 BTU/Hr = 290W) 8525 BTU/Hr
Operating temperature -5 to 45°C up to 5000ft elevation, -5 to 40°C up to 10000ft elevation
Storage temperature -40 to 70°C
Relative humidity operating,
non-condensing
5 to 95% non-condensing
Relative humidity non-operating,
non-condensing
5 to 95% non-condensing