Data Sheet Cisco Catalyst 3750-X and 3560-X Series Switches The Cisco® Catalyst® 3750-X and 3560-X Series Switches are an enterprise-class lines of stackable and standalone switches, respectively. These switches provide high availability, scalability, security, energy efficiency, and ease of operation with innovative features such as Cisco StackPower (available only on the Catalyst 3750-X), IEEE 802.
Switch Configurations All switch models can be configured with four optional network modules. The UPOE, PoE+, and non-PoE switch models are available with either the LAN Base or IP Base feature set. IP Services feature set is available as an upgrade option at the time of ordering or through a license at a later time. The GE SFP switch models are available with either IP Base or IP Services feature set. Stackable Switches Figure 1 shows the Cisco Catalyst 3750-X Series Switches (front and back). Figure 1.
Feature Set Models Total 10/100/1000 Ethernet Ports Default AC Power Supply Available PoE Power IP Services WS-C3750X-24T-E 24 350W - WS-C3750X-48T-E 48 WS-C3750X-24P-E 24 PoE+ 715W 435W WS-C3750X-48P-E 48 PoE+ WS-C3750X-48PF-E 48 PoE+ 1100W 800W WS-C3750X-24U-E 24 UPOE 1100W 800W WS-C3750X-48U-E 48 UPOE 1100W 800W WS-C3750X-12S-E 12 GE SFP 350W - WS-C3750X-24S-E 24 GE SFP 350W - Stackpower Standalone Switches Figure 2 shows Cisco Catalyst 3560-X Series Switches.
Feature Set Models Total 10/100/1000 Ethernet Ports Default AC Power Supply Available PoE Power IP Services WS-C3560X-24T-E 24 350W - WS-C3560X-48T-E 48 WS-C3560X-24P-E 24 PoE+ 715W 435W WS-C3560X-48P-E 48 PoE+ WS-C3560X-48PF-E 48 PoE+ 1100W 800W WS-C3560X-24U-E 24 UPOE 1100W 800W WS-C3560X-48U-E 48 UPOE 1100W 800W Cisco Catalyst 3750-X and 3560-X Series Software In addition to IP Base and IP Services feature sets, the Cisco Catalyst 3750-X and 3560-X Series come with a new LAN
Cisco StackWise Plus Technology Cisco StackWise Plus technology is built on the highly successful industry leading StackWise technology, which is a premium stacking architecture optimized for GbE. StackWise technology was designed to respond to additions, deletions, and redeployment while maintaining constant performance. The stack behaves as a single switching unit that is managed by a master switch elected from one of the member switches.
StackPower can be deployed in either power sharing mode or redundancy mode. In power sharing mode, the power of all the power supplies in the stack is aggregated and distributed among the switches in the stack. In redundant mode, when the total power budget of the stack is calculated, the wattage of the largest power supply is not included.
Table 3.
4. Security Anomaly Detection by examining flows that do not traverse trust boundaries for inside the perimeter attacks 5. Impacts of network and application changes 6. Compliance conformation 7. Traffic patterns for capacity planning Enabling FNF at the access switch ensures you get all flows. The access switch is the most logical place in the network for collecting statistics and monitoring all flows.
Dual Redundant Modular Power Supplies The Cisco Catalyst 3750-X Series and 3560-X Series Switches support dual redundant power supplies. The switch ships with one power supply by default, and the second power supply can be purchased at the time of ordering the switch or at a later time. If only one power supply is installed, it should always be in the power supply bay 1. (See Figure 5). Figure 5.
Table 7. Available PoE with DC power supply Model # of 440W Total Available PoE Budget DC PS 24-Port PoE Switch 48-Port PoE Switch 1 220W 2 660W 1 185W 2 625W Power over Ethernet Plus (PoE+)/Universal Power Over Ethernet (UPOE) In addition to PoE 802.3af, the Cisco Catalyst 3750-X and 3560-X Series Switches support PoE+ (IEEE 802.3at standard), which provides up to 30W of power per port and UPOE, which provides 60W of power per port (only on UPOE-capable models).
The XPS supports dual redundant power supplies and fans. Up to nine switches can be connected to the XPS 2200, and it can provide power backup to two of the failed switches concurrently (when appropriately sized power supplies are used). The power supplies used by the XPS 2200 are the same as the ones supported in the Cisco Catalyst 3750-X and 3560-X Series Switches. The XPS 2200 is fully configurable for setting switch priorities in case of multiple failures.
Cisco EnergyWise Technology Cisco EnergyWise is an innovative architecture, added to fixed configuration switches, promoting companywide sustainability by reducing energy consumption across an entire corporate infrastructure and affecting more than 50 percent of global greenhouse gas emissions created by worldwide building infrastructure, a much greater effect than the 2 percent generated by the IT industry.
peak times the client devices may use sleep or hibernate modes. At this time the network interface can be completely inactive and able to be woken on demand by remote request. Prior to the EEE standard, it was a common practice for client devices such as personal computers and servers to save power during sleep states by renegotiating the Ethernet link to a lower speed.
● Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server eases switch deployment. ● Automatic QoS (AutoQoS) simplifies QoS configuration in voice over IP (VoIP) networks by issuing interface and global switch commands to detect Cisco IP phones, classify traffic, and help enable egress queue configuration.
● Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network. ● For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events). ● Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet takes from source to destination.
● Configuration management tools built from Cisco experience and Cisco Validated Design recommendations ● Monitoring and troubleshooting capabilities that incorporates Cisco hardware best practices and diagnostics features ● Automation in managing hardware inventories, security vulnerabilities (PSIRTS) and platform end-of-life and support cycles For detailed information about CiscoWorks LMS, go to http://www.cisco.com/en/US/products/sw/cscowork/ps2425/index.html.
Switches, MACsec provides Layer 2, line rate Ethernet data confidentiality and integrity on host facing ports, protecting against man-in-the-middle attacks (snooping, tampering, and replay). ● FIPS 140-2 validated for devices used in government and sensitive environments for extremely high levels of data security. ● Flexible authentication that supports multiple authentication mechanisms including 802.1X, MAC Authentication Bypass and web authentication using a single, consistent configuration.
● Multilevel security on console access prevents unauthorized users from altering the switch configuration. ● Bridge protocol data unit (BPDU) Guard shuts down Spanning Tree PortFast-enabled interfaces when BPDUs are received to avoid accidental topology loops. ● Spanning Tree Root Guard (STRG) prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes.
High-Performance IP Routing Cisco Express Forwarding hardware routing architecture delivers extremely high-performance IP routing in the Cisco Catalyst 3750-X and 3560-X Series Switches. ● Static routing (16 routes) with LAN Base feature set. ● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], and RIPv2, RIPng, EIGRP stub) are supported for small-network routing applications with IP Base feature set.
● The Cisco committed information rate (CIR) function provides bandwidth in increments as low as 8 Kbps. ● Rate limiting is provided based on source and destination IP address, source and destination MAC address, Layer 4 TCP/UDP information, or any combination of these fields, using QoS ACLs (IP ACLs or MAC ACLs), class maps, and policy maps. ● Up to 64 aggregate or individual policers are available per Fast Ethernet or GbE port.
Performance Numbers for All Switch Models Total Switched Virtual Interfaces (SVIs) 1K Jumbo Frame 9216 Byte Total Routed Ports per 3750-X Stack 468 Forwarding Rate of the Switch Models (with Two 10GbE Uplinks) Forwarding Rate 3750X-24T 65.5 mpps 3750X-24P 3750X-24U 3750X-48T 101.2 mpps 3750X-48P 3750X-48PF 3750X-48U 3750X-12S 35.7 mpps 3750X-24S 65.5 mpps 3560X-24T 65.5 mpps 3560X-24P 3560X-24U 3560X-48T 101.
Dimensions, Weight, Acoustic, MTBF, and Environmental Range Specifications for Cisco Catalyst 3750-X and 3560-X Series Switches Table 11 shows dimensions, weight, acoustic, MTBF, and environmental range. Table 11. Dimensions, Weight, Acoustic, MTBF, and Environmental Range Dimensions (H x W x D) Inches Centimeters 3750X-24T 1.75 x 17.5 x 18.0 4.45 x 44.5 x 46.0 1.75 x 17.5 x 19.5 4.45 x 44.5 x 49.5 3750X-12S 1.75 x 17.5 x 18.0 4.45 x 44.5 x 46.0 3750X-24S 1.75 x 17.5 x 18.0 4.45 x 44.5 x 46.
3750X-48P 139,913 3750X-48PF 139,913 3750X-48U 184,120 3750X-12S 194,224 3750X-24S 163,707 3560X-24T 208,218 3560X-24P 181,370 3560X-24U 247,580 3560X-48T 186,778 3560X-48P 149,594 3560X-48PF 149,594 3560X-48U 189,710 C3KX-PWR-350WAC 580,710 C3KX-PWR-715WAC 664,055 C3KX-PWR-1100WAC 392,174 C3KX-PWR-440WDC 469,350 C3KX-NM-1G 5,083,574 C3KX-NM-10G 2,468,553 C3KX-NM-10GT 1,411,719 C3KX-SM-10G 396,940 Environmental Ranges With AC Power Supply Normal Operating Temperature
Typical: Noise emission for a typical configuration Maximum: Statistical maximum to account for variation in production Relative Humidity 5% to 95%, noncondensing Storage Environment Temperature: -40 C' to 70 C' Altitude: 15,000 ft Vibration Operating: 0.41Grms from 3 to 500Hz with spectral break points of 0.0005 G2/Hz at 10Hz and 200Hz 5dB/octave roll off at each end. Nonoperating: 1.12Grms from 3 to 500Hz with spectral break points of 0.0065 G2/Hz at 10Hz and 100Hz 5dB/octave roll off at each end.
Description Specification Standards CISCO-MAC-NOTIFICATION-MIB RFC1213-MIB CISCO-MEMORY-POOL-MIB RFC1253-MIB CISCO-PAGP-MIB RMON-MIB CISCO-PING-MIB RMON2-MIB CISCO-PROCESS-MIB SNMP-FRAMEWORK-MIB CISCO-RTTMON-MIB SNMP-MPD-MIB CISCO-STP-EXTENSIONS-MIB SNMP-NOTIFICATION-MIB CISCO-SYSLOG-MIB SNMP-TARGET-MIB CISCO-TCP-MIB SNMPv2-MIB CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB TCP-MIB CISCO-VLAN-MEMBERSHIP-MIB UDP-MIB IEEE 802.1s RMON I and II standards IEEE 802.
Description Specification Weight: 3.5 lb (1.6 kg) Weight: 2.78 lb (1.26 kg) Weight: 2.76 lb (1.25 kg) Weight: 2.65 lb (1.2 kg) Operating Temperature 23 to 113°F (-5 to 45°C) Storage Temperature -40 to 158°F (-40 to 70°C) Relative Humidity Operating, and Nonoperating Noncondensing 5 to 90% noncondensing Altitude 10,000 ft. (3000 meters), up to 45°C MTBF Calculated MTBF must be greater than 300,000 using Telcordia SR-332, Method 1, Case 3.
Models Uplink Module Power Consumption, W 0% Traffic 10% Traffic 100% Traffic Weighted Average 3750X-48PF & 3560X-48PF 140.9 139.6 142.9 140.1 3750X-12S 87.6 87.9 91.9 88.6 3750X-24S 109.7 110.1 114.1 110.7 3560X-24U 99.23 99.10 102.63 99.48 3560X-48U 123.54 122.73 125.99 123.17 3750X-24U 99.34 99.16 102.69 99.54 127.17 126.33 129.48 126.77 111.7 110.6 114.1 111.1 3750X-24P & 3560X-24P 119 116.9 122.4 117.7 3750X-48T & 3560X-48T 142.8 141.9 145.4 142.
Description Specification Electromagnetic Emissions Certifications FCC Part 15 Class A EN 55022B Class A (CISPR22 Class A) VCCI Class A AS/NZS 3548 Class A or AS/NZS CISPR22 Class A KCC CE Marking GOST (Russian mark - Post FCS through partners) CCC for PS FRU Redundant Environmental Reduction of Hazardous Substances (ROHS) 5 Noise Specifications Office Product Spec: 48dBA at 30°C (refer to ISO 7779) Telco CLEI code NEBS The Cisco Catalyst 3750-X and 3560-X Series Switches are NEBS Level 3 complian
Software Policy for Cisco Catalyst 3750-X and 3560-X Series Switches Customers with Cisco Catalyst LAN Base and IP Base software feature sets will be provided with maintenance updates and bug fixes designed to maintain the compliance of the software with published specifications, release notes, and industry standards compliance as long as the original end user continues to own or use the product or up to one year from the end-of-sale date for this product, whichever occurs earlier.
Ordering Information Table 19 lists ordering information for the Cisco Catalyst 3750-X and 3560-X Series. To place an order, visit the Cisco Ordering homepage at http://www.cisco.com/en/US/ordering/or13/or8/order_customer_help_how_to_order_listing.html. Table 19.
Product Number Product Description WS-C3560X-48P-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 715W AC power supply 1 RU, LAN Base feature set WS-C3560X-48P-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 715W AC power supply 1 RU, LAN Base feature set WS-C3560X-48PF-L Standalone 48 10/100/1000 Ethernet PoE+ ports, with 1100W AC power supply 1 RU, LAN Base feature set WS-C3560X-48U-L Standalone 48 10/100/1000 Ethernet UPOE ports, with 1100W AC power supply 1 RU, LAN Base feature set
Product Number Product Description CAB-SPWR-30CM= Cisco Catalyst 3750-X StackPower cable 30 cm spare CAB-SPWR-150CM= Cisco Catalyst 3750-X StackPower cable 150 cm spare Spare Power Cords for the Cisco Catalyst 3750-X and 3560-X Series CAB-3KX-AC= AC Power Cord for Cisco Catalyst 3K-X (North America) CAB-3KX-AC-AP= AC Power Cord for Cisco Catalyst 3K-X (Australia) CAB-3KX-AC-AR= AC Power Cord for Cisco Catalyst 3K-X (Argentina) CAB-3KX-AC-SW= AC Power Cord for Cisco Catalyst 3K-X (Switzerland)
Step One: Product Activation Keys Step Two: Upgrade License Product Number and Description Product Number Product Description L-C3750X-48-L-S C3750X-48 LAN Base to IP Base E-License 3750-X IP Base to IP Services Upgrade C3750X-24-IOS-S-E C3750X-24 IP Base to IP Services factory IOS Upgrade C3750X-48-IOS-S-E C3750X-48 IP Base to IP Services factory IOS Upgrade C3750X-24-S-E C3750X-24 IP Base to IP Services Paper License C3750X-48-S-E C3750X-48 IP Base to IP Services Paper License C3750X-12S-S-
XPS 2200 Performance Specifications Table 21 lists the performance specifications for the power supplies. Please note that the same power supplies used in the 3750-X and 3560-X are all usable in the XPS-2200 (please refer to Table 12). Table 21.
Description Specification Operating altitude 10,000 ft. (3000m) Storage altitude 15,000 ft. (4750 m) Mean Time Between Failure (MTBF) 222,000 hours Electromagnetic compatibility certifications FCC Class A for North America: 47 CFR Part 15 VCCI Class A for Japan: V-3/2007.04 CCC EMC for China on Spare Power Supplies: EN61000-3-2 (GB17625.1-1998) BSMI Class A for Taiwan: CNS13438 KCC (formerly MIC) GB17625.
Connectors and Cabling Table 26 describes the connectors and cabling for the XPS2200. Table 26. Cisco XPS 2200 Connectors and Cabling Connectors and Cabling ● Cisco StackPower: Cisco Proprietary Power Stacking cables ● Service port: RJ-45-to-DB9 cable for PC connections Power Connectors ● Customers can provide power to a XPS-2200 by using either the internal power supply or via one or more 3750X/3560-X Switches. The connectors are located at the back of the switch.
● FEP (PS1 & PS2) ◦ Solid Green - Stack Power Mode OK ◦ Blinking Green - RPS Mode OK ◦ Solid Amber - Stack Power Mode Faulty Power Supply Specifications The XPS 2200 uses the same power supplies as the Cisco Catalyst 3750-X and 3560-X Series Switches. Refer to Table 12 for the power specifications for each type of power supply that is usable in the XPS 2200 as well as the Cisco Catalyst 3750-X and 3560-X Series Switches.
