Datasheet

© 2012-2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 34 of 35
LEDs
●
Blinking Green not defined
●
Solid Amber indicates that SP port off-line (No Power Output)
●
Blinking Amber for any port faults
Combined Function (SP and
RPS) LEDs
●
Blinking Amber on both RPS and SP LEDs indicates cable fault (short, etc.)
●
Both RPS and SP ports alternate Green/Amber when selected via push button
●
18 Port LEDs for new features with more comprehensive single look status assessment
System LEDs - Front of
System
●
System
●
Solid Green - Normal operation with no faults
●
Blinking Green during boot
●
Solid Amber - Temperature faults, cable faults, port faults, power supply faults, fan faults
●
Blinking Amber during software updates
●
Fan
●
Use one Fan LED, amber when any one fan fails, green when all OK
●
Each FRU Fan (3) will have an associated Status LED (green=working, amber=failed), but no silkscreen on
front panel
●
Temp
●
Green - No Problems. Amber - Over Temperature
●
FEP (PS1 & PS2)
●
Solid Green - Stack Power Mode OK
●
Blinking Green - RPS Mode OK
●
Solid Amber - Stack Power Mode Faulty
Power Supply Specifications
The XPS 2200 uses the same power supplies as the Cisco Catalyst 3750-X and 3560-X Series Switches. Refer to
Table 12 for the power specifications for each type of power supply that is usable in the XPS 2200 as well as the
Cisco Catalyst 3750-X and 3560-X Series Switches.