Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 24
Total unicast
routes
8K / 12K * 6K / 12K * 0 11K / 20K *
Directly
connected
hosts
6K 4K / 6K * 0 3K / 6K *
Indirect routes 2K / 6K * 2K / 6K * 0 8K / 14K *
Security ACEs 1K 2K / 4K * 1K 1K
QoS ACEs 0.5K / 0.8K * 0.5K / 0.8K * 0.5K / 0.8K * 0.5K
PBR ACEs 0 0.5K 0 0.5K
* Specific to the Cisco Catalyst 3560E-12D only
Connectors and Cabling
●
1000BASE-T ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
●
100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10 and CWDM SFP-based ports: LC
fiber connectors (single-mode, or multimode fiber)
●
10GBASE-SR, LR, ER, CX4, LX4, LRM X2-based ports: SC fiber connectors (single-
mode, or multimode fiber)
●
Ethernet management port: RJ-45 connectors, 2-pair Cat-5 UTP cabling
●
Management console port: RJ-45-to-DB9 cable for PC connections
Power Connectors
●
Customers can provide power to an access switch by using either the internal power
supply or the Cisco RPS 2300. The connectors are located at the back of the switch.
●
The Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD have dual power supplies and
do not support the RPS.
●
Internal power supply connector: The internal power supply is an autoranging unit. The
internal power supply supports input voltages between 100 and 240VAC. Use the
supplied AC power cord to connect the AC power connector to an AC power outlet.
●
Cisco RPS connector: The connector offers connection for an optional Cisco RPS 2300
that uses AC input and supplies DC output to the switch.
●
Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-
power-supply receptacle.
Indicators
●
Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications
●
System-status LEDs: system, RPS, and bandwidth-utilization indications (on the Cisco
Catalyst 3560E-12D and 3560E-12SD only: system, power supplies, fans)
Inches Centimeters
3560E-24TD 1.75 x 17.5 x 18.1 4.45 x 44.5 x 46.0
3560E-24PD 1.75 x 17.5 x 18.1 4.45 x 44.5 x 46.0
3560E-48TD 1.75 x 17.5 x 18.1 4.45 x 44.5 x 46.0
3560E-48PD 1.75 x 17.5 x 18.1 4.45 x 44.5 x 46.0
3560E-48PD-F 1.75 x 17.5 x 21.7 4.45 x 44.5 x 55.2
3560E-12D 1.75 x 17.5 x 19.5 4.45 x 44.5 x 49.5
Dimensions (H x W x D)
3560E-12SD 1.75 x 17.5 x 15 4.45 x 44.5 x 38.1
Pounds Kilograms
3560E-24TD 17.9 8.1
3560E-24PD 18.3 8.3
3560E-48TD 18.8 8.6
3560E-48PD 19.2 8.75
3560E-48PD-F 20.9 9.5
3560E-12D 23.5 10.7
Weight
3560E-12SD 16 7.27
Environmental Ranges
●
Operating temperature: 32 to 113ºF (0 to 45ºC)
●
Storage temperature: –13 to 158ºF (–25 to 70ºC)
●
Relative humidity operating: 0 to 95% (noncondensing)
●
Relative humidity nonoperating: 10 to 85% (noncondensing)
●
Operating altitude: up to 10,000 ft (3049 m)
●
Storage altitude: up to 15,000 ft (4573 m)
●
Cisco Catalyst 3560E-12D and Catalyst 3560E-12SD: up to 50,000 feet over allowable
temperature range; NEBS - up to 13,000 feet [4000 m]