Specification Sheet
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of14
Description
Specification
Maximum transmission unit (MTU)
Up to 9000 bytes
Up to 9000 bytes
Jumbo frames
9198 bytes
9198 bytes
Forwarding rate 64 Byte Packet Cisco Catalyst 3560-CX and 2960-CX
2960CX-8TC-L
17.9 mpps
2960CX-8PC-L
17.9 mpps
3560CX-8TC-S
17.9 mpps
3560CX-12TC-S
23.8 mpps
3560CX-8PC-S
17.9 mpps
3560CX-12PC-S
23.8 mpps
3560CX-12PD-S
50.6 mpps
3560CX-8PT-S
14.9 mpps
3560CX-8XPD-S
68.4 mpps
Resource Cisco Catalyst 3560-CX and 2960-CX
See the release notes for the SDM Templates for 3560-CX and 2960-CX:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960cx_3650cx/software/release/15-
2_3_e/release_notes/rn-1523e-2960cx-3560cx.html
Connectors and
cabling
Cisco Catalyst 3560-CX and 2960-CX Ethernet Interfaces:
●
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
●
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
●
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Cisco Catalyst 3560-CX and 2960-CX SFP and SFP+ interfaces:
For information about supported SFP/SFP+ modules, refer to the Transceiver Compatibility matrix tables at
http://www.cisco.com/c/en/us/support/interfaces-modules/transceiver-modules/products-device-support-tables-list.html
Power connectors
●
Customers can provide power to a switch by using the internal power supply. The connector is located at the back
of the switch. The internal power supply is an autoranging unit
●
The internal power supply supports input voltages between 100 and 240VAC
●
Use the supplied AC power cord to connect the AC power connector to an AC power outlet
Note: The Cisco Catalyst WS-C3560CX-8PT-S has an option for an external AC-DC or DC-DC power adapter if
desired.
Indicators
Per-port status: Link integrity, disabled, activity, speed, full-duplex
System status: System, link status, link duplex, link speed
Dimensions
(H x W x D)
Cisco Catalyst 3560-CX and
2960-CX
Inches
Centimeters
2960CX-8TC-L
1.75 x 10.6 x 8.4
4.44 x 26.9 x 21.3
2960CX-8PC-L
1.75 x 10.6 x 9.4
4.44 x 26.9 x 23.8
3560CX-8TC-S
1.75 x 10.6 x 8.4
4.44 x 26.9 x 21.3
3560CX-12TC-S
1.75 x 10.6 x 8.4
4.44 x 26.9 x 21.3
3560CX-8PC-S
1.75 x 10.6 x 9.4
4.44 x 26.9 x 23.8
3560CX-12PC-S
1.75 x 10.6 x 9.4
4.44 x 26.9 x 23.8
3560CX-12PD-S
1.75 x 10.6 x 9.4
4.44 x 26.9 x 23.8
3560CX-8PT-S
1.75 x 10.6 x 7.0
4.44 x 26.9 x 17.7
3560CX-8XPD-S
1.75 x 10.6 x 10.4
4.44 x 26.9 x 26.4