User Manual

Mounting the Switch with a Magnet (Catalyst 3560 8- and 12-Port Switches)

According to safety regulations, when you mount the switch with a magnet, make sure its front panel faces down to prevent

airflow restriction and to provide easier access to the cables. This requires that you mount the switch with a magnet only on a

vertical magnetic surface such as a metal filing cabinet.

1. Position the mounting magnet on the mounting surface.

2. Place the bottom of the switch on the magnet.

6 Securing the AC Power Cord (Catalyst 3560 8- and 12-Port Switches)

The AC power-cord retainer is an optional part (PWR-CLIP-CMP).

Metal mounting surface

Switch front panel

Mounting magnet

Step 1

Insert the power-cord retainer wire into the slot on the

plastic holder.

Step 2

Attach the plastic holder onto the switch rear panel with

the supplied screw.

250605

250519