Installation guide

Chapter 3 Switch Installation
Installing the Switch
3-20
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-06
Figure 3-16 Attaching the RPS Connector Cover on the Switch
Mounting the Switch on a Wall
For the best support of the switch and cables, make sure that the switch is attached
securely to wall studs or to a firmly attached plywood mounting backboard.
Mount the switch with the front panel facing up, as shown in Figure 3-17.
Warning To comply with safety regulations, mount the switches on a wall with the front
panel facing up.
100-240V~
5-3A
50/60Hz
DC OUTPUT 1
C
O
N
SO
L
E
86483
RPS
connector
Phillips
pan-head
screws
RPS
connector
cover