Installation guide

vii
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-06
Contents
Korea 3-6
Hungary 3-7
Site Requirements 3-7
Verifying Package Contents 3-8
Installing the Switch 3-9
Rack Mounting 3-9
Attaching Brackets to the Catalyst 3550-12T and 3550-12G
Switches
3-10
Attaching Brackets to the Catalyst 3550-24, 3550-24-DC, 3550-24-FX,
3550-24PWR, and 3550-48 Switches
3-14
Mounting the Switch in a Rack 3-17
Wall Mounting 3-18
Attaching the Brackets to the Switch 3-19
Attaching the RPS Connector Cover 3-19
Mounting the Switch on a Wall 3-20
Table or Shelf Mounting 3-21
Installing the Optional Ground Kit 3-22
Powering the Switch and Connecting Devices 3-24
Powering the Switch 3-24
Connecting a Cisco RPS 3-24
Connecting to the 10/100 and 10/100/1000 Ports 3-25
Connecting to the 10/100 Inline Power Ports 3-26
Connecting to 100BASE-FX Ports 3-26
Installing GBIC Modules 3-27
CHAPTER 4 Troubleshooting 4-1
Understanding POST Results 4-1
Clearing the Switch IP Address and Configuration 4-2
Diagnosing Problems 4-3