Installation guide

1-13
Catalyst 3550 Multilayer Switch Hardware Installation Guide
78-11358-06
Chapter 1 Using Express Setup
Where to Go Next
Where to Go Next
After you have saved your configuration to the switch, you can install the switch
or further configure it by using CMS or the CLI. See the “Management Options”
section on page 2-16 for more information about configuring and managing the
switch.
Other Switch Home Page Features
These additional features are available from the switch home page, as shown on
the left menu bar in Figure 1-8 on page 1-12:
• Cluster Management Suite—Launch the CMS, through which you can
configure and monitor a switch or switch clusters, display network topologies
to gather link information, and display switch images to modify switch- and
port-level settings. For more information, refer to the switch software
configuration guide.
• Tools—Access diagnostic and monitoring tools such as Telnet and Extended
Ping.
• Help Resources—Access Catalyst 3550 documentation.
Installing or Connecting Devices to the Switch
For detailed installation procedures on mounting your switch or connecting
devices to the switch, see Chapter 3, “Switch Installation.”