Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 6 of 7
Switching Specifications
• MAC Addresses: 16,00
• Virtual LANs (VLANs): 1,024
• Fabric: Store-and-Forward
• Queues: Dual Queuing
• Indicators & Interfaces
Catalyst 2980G-A Switch
• System status: Green (operational)/Red (faulty)
• Console (RJ-45 female)
• Reset (switch recessed protected)
• 10/100BASE-T Management (RJ-45 female) data terminal equipment (DTE): Green (good)/ orange (disabled)/
off (not connected)
• 80-port 10/100 Mbps Fast Ethernet Autosensing, Autonegotiating (RJ-45 Female)
– Link: Green (operational)/Red (faulty)
• Two-port 1000BaseX Gigabit Ethernet (GBIC Female)
– Link: Green (operational)/Red (faulty)
Power Supply
• PWR:
– GOOD: Green (good)
– FAIL: Red (faulty)
• SNMP MIB supported
Chassis Physical Specifications
• Dimensions (H x W x D):
– 3.5 x 17.5 x 17 in. (8.89 x 44.45 x 43.18 cm.)
• Two Rack Units (RU) high
• Maximum Weight: 16 lb. (7.3 kg)
• Mounting: 19-in. rack-compatible (rack and cable guide hardware included)
Power Requirements for 2980G-A:
• Input Current:
– 2.3A max. @ 90VAC 50-60Hz
– 1.7A max @ 120VAC 50-60Hz
– 1.2A max @ 180VAC 50-60Hz
– 0.9A max @ 240VAC 50-60Hz
• KVA Rating: 0.208 KVA
• Output Power: 156 watts
• Heat Dissipation: 208 watts (670 BTUs per hour)
• Power factor correction: YES