Datasheet

Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 9 of 17
Manageability
Superior
Manageability
Cisco IOS CLI support provides a common user interface and command set with all Cisco
routers and Cisco Catalyst desktop switches.
Cisco Service Assurance Agent (SAA) support facilitates service-level management
throughout the LAN.
VLAN trunks can be created from any port, using either standards-based 802.1Q tagging
or the Cisco Inter-Switch Link (ISL) VLAN architecture.
Up to 1024 VLANs per switch and up to 128 spanning-tree instances per switch are
supported.
4000 VLAN IDs are supported.
Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN
for easier administration and troubleshooting.
Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches.
IGMP snooping provides fast client joins and leaves of multicast streams and limits
bandwidth-intensive video traffic to only the requestors.
Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in
a Layer 2 switch network from any other switch in the same network.
For enhanced traffic management, monitoring, and analysis, the Embedded Remote
Monitoring (RMON) software agent supports 4 RMON groups (history, statistics, alarms,
and events).
Layer 2 traceroute eases troubleshooting by identifying the physical path that a packet
takes from source to destination.
All 9 RMON groups are supported through a SPAN port, which permits traffic monitoring
of a single port, a group of ports from a single network analyzer, or RMON probe.
The Domain Name System (DNS) provides IP address resolution with user-defined device
names.
Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades
by downloading from a centralized location.
Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all
intranet switches.
Multifunction LEDs per port for port status; half-duplex and full-duplex mode; 10-, 100-,
and 1000-BASE-T indication; and switch-level status LEDs for system, redundant-power
supply, and bandwidth utilization provide a comprehensive and convenient visual
management system.
Table 1 Product Features and Benefits (Continued)
Feature Benefit