Data Sheet Cisco Catalyst 2960-X Series Switches Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features. Figure 1.
Switch Models and Configurations Catalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply and can accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set. Table 1.
LAN Lite models have reduced functionality and scalability for small deployments with basic requirements. Cisco Catalyst 2960-X Family of Switches are available with the LAN Base and LAN Lite feature sets and Catalyst 2960XR Family of switches are available IP Lite feature sets. Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN Base cannot be upgraded to IP Lite.
● Private VLANs restrict traffic between hosts in a common segment by segregating traffic at Layer 2, turning a broadcast segment into a nonbroadcast multi access like segment. This feature is available in IPLite feature set only. ◦ Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic.
● Cross-stack EtherChannel provides the ability to configure Cisco EtherChannel technology across different members of the stack for high resiliency. ● Flexlink provides link redundancy with convergence time less than 100 milliseconds. ● IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of Layer 2 load balancing and distributed processing.
management. The advantages of true stacking include lower total cost of ownership and higher availability through simplified management as well as cross-stack features including EtherChannel, SPAN, and FlexLink. To provide investment protection, FlexStack-Plus is backwards-compatible with FlexStack. Cisco Catalyst 2960-X LAN Base switches equipped with a FlexStack-Plus module can be stacked with Catalyst 2960-S and 2960-SF LAN Base switches equipped with a FlexStack module (see Table 5). Table 3.
Figure 3. 2960-XR Family Power Supply © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
The following table shows the different power supplies available in these switches and the available PoE power. Table 5.
Table 7.
● Dynamic Trunking Protocol (DTP) facilitates dynamic trunk configuration across all switch ports. ● Port Aggregation Protocol (PAgP) automates the creation of Cisco Fast EtherChannel groups or Gigabit ® EtherChannel groups to link to another switch, router, or server. ● Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with devices that conform to IEEE 802.3ad. This feature is similar to Cisco EtherChannel technology and PAgP.
Power Management The 2960-X switches offer a range industry leading features for effective energy efficiency and energy management. Switch Hibernation Mode (SHM) is an industry first and available on all 2960-X series switches. This feature puts the switch in ultra low power mode during periods of non-operation such as nights or weekends. Switch Hibernation Mode on the 2960-X switches can be scheduled using EnergyWise compliant management software. IEEE 802.
Technical Specifications Table 8. Cisco Catalyst 2960-X Series Hardware Hardware Specifications Flash memory 128 MB for LAN Base & IP Lite SKUs, 64 MB for LAN Lite SKUs DRAM 512 MB CPU APM86392 600MHz dual core Console Ports USB (Type-B), Ethernet (RJ-45) Storage Interface USB (Type-A) for external flash storage Network Management Interface 10/100 Mbps Ethernet (RJ-45) Table 9.
Forwarding Rate: 64-Byte L3 Packets Cisco Catalyst 2960XR-48FPS-I 107.1 Mpps Cisco Catalyst 2960XR-48LPS-I 107.1 Mpps Cisco Catalyst 2960XR-24PS-I 71.4 Mpps Cisco Catalyst 2960XR-48TS-I 107.1 Mpps Cisco Catalyst 2960XR-24TS-I 71.4 Mpps Table 11. Cisco Catalyst 2960-X Series Mechanical Specifications Models Dimensions Inches (H x D x W) Centimeters (H x D x W) WS-C2960X-48FPD-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.5 WS-C2960X-48LPD-L 1.75 x 14.5 x 17.5 4.5 x 36.8 x 44.
Table 12. Cisco Catalyst 2960-XR Series Mechanical Specifications Models Dimensions Inches (H x D x W) Centimeters (H x D x W) WS-C2960XR-48FPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48LPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48TD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-24PD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-24TD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48FPS-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48LPS-I 1.
Environmental Ranges Sound Pressure Sound Power Model LpA (Typical) LpAD (Maximum) LwA (Typical) LwAD (Maximum) Cisco Catalyst 2960X-48FPD-L 54dB 57dB 6.3B 6.6B 40dB 43dB 4.9B 5.2B 54dB 57dB 6.3B 6.6B Cisco Catalyst 2960X-24PSQ-L N/A N/A N/A N/A Cisco Catalyst 2960X-48TS-L 45dB 48dB 5.4B 5.7B 40dB 43dB 4.9B 5.2B Cisco Catalyst 2960XR-48FPD-I 46dB 48dB 5.5B 5.7B Cisco Catalyst 2960XR-48LPD-I 45dB 48dB 5.4B 5.7B Cisco Catalyst 2960XR-24PD-I 45dB 48dB 5.4B 5.
Environmental Ranges Cisco Catalyst 2960XR-24TD-I 561,890 Cisco Catalyst 2960XR-48FPS-I 230,860 Cisco Catalyst 2960XR-48LPS-I 274,380 Cisco Catalyst 2960XR-24PS-I 321,290 Cisco Catalyst 2960XR-48TS-I 438,130 Cisco Catalyst 2960XR-24TS-I 557,320 Cisco PWR-C2-250WAC 1,000,000 Cisco PWR-C2-640WAC 1,000,000 Cisco PWR-C2-1025WAC 1,000,000 * Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences.
Table 15.
Category Specification RFC compliance ● RFC 768 - UDP ● RFC 783 - TFTP ● RFC 1901 - SNMP v2C ● RFC 1902-1907 - SNMP v2 ● RFC 791 - IP ● RFC 792 - ICMP ● RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6 ● FRC 2068 - HTTP ● RFC 793 - TCP ● RFC 826 - ARP ● RFC 854 - Telnet ● RFC 951 - Bootstrap Protocol (BOOTP) ● RFC 959 - FTP ● RFC 1112 - IP Multicast and IGMP ● RFC 1157 - SNMP v1 ● RFC 1166 - IP Addresses ● RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery ● RFC 1305 -
Power Rating Cisco Catalyst 2960X-48FPD-L 0.89 kVA Cisco Catalyst 2960X-48LPD-L 0.48 kVA Cisco Catalyst 2960X-24PD-L 0.47 kVA Cisco Catalyst 2960X-48TD-L 0.049 kVA Cisco Catalyst 2960X-24TD-L 0.034 kVA Cisco Catalyst 2960X-48FPS-L 0.89 kVA Cisco Catalyst 2960X-48LPS-L 0.49 kVA Cisco Catalyst 2960X-24PS-L 0.49 kVA Cisco Catalyst 2960X-24PSQ-L 0.16 kVA Cisco Catalyst 2960X-48TS-L 0.051 kVA Cisco Catalyst 2960X-24TS-L 0.039 kVA Cisco Catalyst 2960X-48TS-LL 0.
Table 17. Power Consumption1 Measured Power Consumption in Watts2 3 Model 0% Traffic 10% Traffic 100% Traffic Weighted Average Cisco Catalyst 2960X-48FPD-L 50.8 65.9 66.7 66.0 Cisco Catalyst 2960X-48LPD-L 45.7 61.1 62.0 61.2 Cisco Catalyst 2960X-24PD-L 44.7 52.3 53.1 52.3 Cisco Catalyst 2960X-48TD-L 32.9 47.0 47.8 47.1 Cisco Catalyst 2960X-24TD-L 24.9 32.2 33.1 32.3 Cisco Catalyst 2960X-48FPS-L 51.9 66.6 66.8 66.6 Cisco Catalyst 2960X-48LPS-L 46.7 60.8 61.1 60.
Specification Description EMC - Immunity EN55024 CISPR24 EN300386 KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code US Government Certifications USGv6 and IPv6 Ready Logo Cisco Enhanced Limited Lifetime Hardware Warranty Cisco Catalyst 2960-X Series Switches come with an enhanced limited lifetime warranty (E-LLW).
Technical Support and Services Table 20. Technical Services Available for Cisco Catalyst 2960-X Series Switches Technical Services Cisco SMARTnet Service ● Around-the-clock, global access to the Cisco TAC ● Unrestricted access to the extensive Cisco.
Part Number 10/100/1000 Ethernet Interfaces Uplink Interfaces Cisco IOS Software Feature Set Available PoE Power FlexStack-Plus Stacking WS-C2960X-48LPS-L 48 4 SFP LAN Base 370W Optional WS-C2960X-24PS-L 24 4 SFP LAN Base 370W Optional WS-C2960X-24PSQ-L 24 2 SFP, 2 10/100/1000BT LAN Base 92W Optional WS-C2960X-48TS-L 48 4 SFP LAN Base - Optional WS-C2960X-24TS-L 24 4 SFP LAN Base - Optional WS-C2960X-48TS-LL 48 2 SFP LAN Lite - No WS-C2960X-24TS-LL 24 2 SFP LAN L
For more information about the RPS-2300, visit cisco.com/en/US/products/ps7130/index.html. Table 25.
Part Numbers Description CAB-ACBZ-12A AC power cord (Brazil) 12A/125V BR-3-20 plug for less than 12A device Contact Cisco For more information about Cisco products, contact: ● Phone: +1 800 553-NETS (6387) ● Worldwide Product Support ● Company Website: cisco.com Printed in USA © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
