Data Sheet Cisco Catalyst 2960-X Series Switches Product Overview Cisco® Catalyst® 2960-X Series Switches are fixed-configuration, stackable Gigabit Ethernet switches that provide enterprise-class access for campus and branch applications (Figure 1). Designed for operational simplicity to lower total cost of ownership, they enable scalable, secure and energy-efficient business operations with intelligent services and a range of advanced Cisco IOS® Software features. Figure 1.
Switch Models and Configurations Catalyst 2960-X switches include a single fixed power supply and are available with either the Cisco IOS LAN Base or LAN Lite feature set. Catalyst 2960-XR switch models include a field-replaceable modular power supply and can accommodate a second power supply. Catalyst 2960-XR is available only with the Cisco IOS IP Lite feature set. Table 1.
Note that each switch model is tied to a specific feature level; LAN Lite cannot be upgraded to LAN Base and LAN Base cannot be upgraded to IP Lite. For more information about the features included in the LAN Lite, LAN Base and IP Lite feature sets, refer to Cisco Feature Navigator: http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp.
● Private VLANs restrict traffic between hosts in a common segment by segregating traffic at Layer 2, turning a broadcast segment into a nonbroadcast multi access like segment. This feature is available in IP-Lite feature set only. ◦ Private VLAN Edge provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic.
● Flexlink provides link redundancy with convergence time less than 100 milliseconds. ● IEEE 802.1s/w Rapid Spanning Tree Protocol (RSTP) and Multiple Spanning Tree Protocol (MSTP) provide rapid spanning-tree convergence independent of spanning-tree timers and also offer the benefit of Layer 2 load balancing and distributed processing. Stacked units behave as a single spanning-tree node.
Resources LAN Lite (Default) LAN Base (Default) IPv6 Unicast Indirect Routes 0 1K IPv4 Multicast Routes and IGMP Groups 1k 1K IPv6 Multicast Groups 1k 1K IPv4 QoS ACEs 384 500 IPv6 QoS ACEs 256 500 IPv4 Security ACEs 256 625 IPv6 Security ACEs 256 625 Table 4.
Table 6. FlexStack-Plus Scalability and Performance Stack Members Stack Bandwidth Stack Limit Cisco IOS Feature Set 2960-XR IP Lite 80G 8 IOS IP Lite 2960-XLAN Base 80G 8 IOS LAN Base 2960-X LAN Base mixed with 2960-S/SF LAN Base 40G 4 IOS LAN Base Figure 2. Cisco FlexStack-Plus Switch Stack Power Supply The Catalyst 2960-X switches comes with one fixed power-supply and options for an external redundant power supply source (RPS2300).
The following table shows the different power supplies available in these switches and the available PoE power. Table 7.
Table 9.
Operational Simplicity Features ● Cisco AutoSecure provides a single-line CLI to enable base line security features (Port Security, DHCP snooping, DAI). This feature simplifies security configurations with a single touch. ● Dynamic Host Configuration Protocol (DHCP) autoconfiguration of multiple switches through a boot server eases switch deployment.
● Remote Switch Port Analyzer (RSPAN) allows administrators to remotely monitor ports in a Layer 2 switch network from any other switch in the same network. ● For enhanced traffic management, monitoring, and analysis, the Embedded Remote Monitoring (RMON) software agent supports four RMON groups (history, statistics, alarms, and events). ● Layer 2 trace route eases troubleshooting by identifying the physical path that a packet takes from source to destination.
Security Management Cisco Identity Services Engine (ISE) support enables the 2960-XR switches to offer security management for all devices connected to it. Figure 4. Fanless Quiet Cool 24-Port PoE Switch The Cisco Catalyst 2960-X Series adds a new member to its 2960-X family, the WS-C2960X-24PSQ-L (Cool). This is a 24-port 10M/100M/1000M switch that can power up to 8 ports of PoE (first eight ports only) with ability to deliver a sum total of 110W of PoE power.
Education The 2960X cool switch extends access to labs, classrooms, and other training rooms from the central/floor distribution rooms, reducing cost of cabling and providing superior quality of service with enhanced security and enterprise network features. Quiet operation and shallow depth make them ideally suited for classrooms or confined areas nearby. Defense Defense establishments often look to an access switch that is portable in mobile units.
Forwarding Rate: 64-Byte L3 Packets Cisco Catalyst 2960X-24PS-L 71.4 Mpps Cisco Catalyst 2960X-24PSQ-L 71.4 Mpps Cisco Catalyst 2960X-48TS-L 107.1 Mpps Cisco Catalyst 2960X-24TS-L 71.4 Mpps Cisco Catalyst 2960X-48TS-LL 104.2 Mpps Cisco Catalyst 2960X-24TS-LL 68.5 Mpps Catalyst 2960-XR Family Cisco Catalyst 2960XR-48FPD-I 130.9 Mpps Cisco Catalyst 2960XR-48LPD-I 130.9 Mpps Cisco Catalyst 2960XR-24PD-I 95.2 Mpps Cisco Catalyst 2960XR-48TD-I 130.9 Mpps Cisco Catalyst 2960XR-24TD-I 95.
Models WS-C2960X-24PS-L 12.8 lbs 5.8 kg WS-C2960X-24PSQ-L 12.8 lbs 5.8 kg WS-C2960X-24TS-L 8.9 lbs 4.0 kg WS-C2960X-48TS-LL 8.9 lbs 4.0kg WS-C2960X-24TS-LL 8.2 lbs 3.7 kg Table 14. Cisco Catalyst 2960-XR Series Mechanical Specifications Models Dimensions Inches (H x D x W) Centimeters (H x D x W) WS-C2960XR-48FPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48LPD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.5 WS-C2960XR-48TD-I 1.75 x 16.0 x 17.5 4.45 x 40.8 x 44.
Environmental Ranges Operating relative humidity 10% to 95% noncondensing Storage relative humidity 10% to 95% noncondensing Acoustic Noise Measured per ISO 7779 and declared per ISO 9296. Bystander positions operating mode at 25°C ambient. Sound Pressure Sound Power Model LpA (Typical) LpAD (Maximum) LwA (Typical) LwAD (Maximum) Cisco Catalyst 2960X-48FPD-L 39 dB 43 dB 4.9 B 5.3 B 42 dB 46 dB 5.1 B 5.5 B 39 dB 43 dB 4.9 B 5.
Environmental Ranges Cisco Catalyst 2960X-24TS-LL 622,350 Cisco Catalyst 2960X-STACK 17,128,090 Cisco Catalyst 2960XR-48FPD-I 231,590 Cisco Catalyst 2960XR-48LPD-I 275,430 Cisco Catalyst 2960XR-24PD-I 322,740 Cisco Catalyst 2960XR-48TD-I 440,880 Cisco Catalyst 2960XR-24TD-I 561,890 Cisco Catalyst 2960XR-48FPS-I 230,860 Cisco Catalyst 2960XR-48LPS-I 274,380 Cisco Catalyst 2960XR-24PS-I 321,290 Cisco Catalyst 2960XR-48TS-I 438,130 Cisco Catalyst 2960XR-24TS-I 557,320 Cisco PWR-C2-250WA
Table 17.
Category Specification RFC compliance ● RFC 768 - UDP ● RFC 783 - TFTP ● RFC 1901 - SNMP v2C ● RFC 1902-1907 - SNMP v2 ● RFC 791 - IP ● RFC 792 - ICMP ● RFC 1981 - Maximum Transmission Unit (MTU) Path Discovery IPv6 ● FRC 2068 - HTTP ● RFC 793 - TCP ● RFC 826 - ARP ● RFC 854 - Telnet ● RFC 951 - Bootstrap Protocol (BOOTP) ● RFC 959 - FTP ● RFC 1112 - IP Multicast and IGMP ● RFC 1157 - SNMP v1 ● RFC 1166 - IP Addresses ● RFC 1256 - Internet Control Message Protocol (ICMP) Router Discovery ● RFC 1305 -
Power Rating (Switch maximum consumption values) Cisco Catalyst 2960X-48FPD-L 0.89 kVA Cisco Catalyst 2960X-48LPD-L 0.48 kVA Cisco Catalyst 2960X-24PD-L 0.47 kVA Cisco Catalyst 2960X-48TD-L 0.049 kVA Cisco Catalyst 2960X-24TD-L 0.034 kVA Cisco Catalyst 2960X-48FPS-L 0.89 kVA Cisco Catalyst 2960X-48LPS-L 0.49 kVA Cisco Catalyst 2960X-24PS-L 0.49 kVA Cisco Catalyst 2960X-24PSQ-L 0.16 kVA Cisco Catalyst 2960X-48TS-L 0.051 kVA Cisco Catalyst 2960X-24TS-L 0.
Table 19. Power Consumption 1 Measured Power Consumption in Watts2 Model 0% Traffic3 10% Traffic 100% Traffic Weighted Average Cisco Catalyst 2960X-48FPD-L 50.8 65.9 66.7 66.0 Cisco Catalyst 2960X-48LPD-L 45.7 61.1 62.0 61.2 Cisco Catalyst 2960X-24PD-L 44.7 52.3 53.1 52.3 Cisco Catalyst 2960X-48TD-L 32.9 47.0 47.8 47.1 Cisco Catalyst 2960X-24TD-L 24.9 32.2 33.1 32.3 Cisco Catalyst 2960X-48FPS-L 51.9 66.6 66.8 66.6 Cisco Catalyst 2960X-48LPS-L 46.7 60.8 61.1 60.
Specification Description EMC - Immunity EN55024 CISPR24 EN300386 KN24 Environmental Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU Telco Common Language Equipment Identifier (CLEI) code US Government Certifications USGv6 and IPv6 Ready Logo Cisco Enhanced Limited Lifetime Hardware Warranty Cisco Catalyst 2960-X Series Switches come with an enhanced limited lifetime warranty (E-LLW).
Technical Support and Services Table 22. Technical Services Available for Cisco Catalyst 2960-X Series Switches Technical Services Cisco SMARTnet Service ● Around-the-clock, global access to the Cisco TAC ● Unrestricted access to the extensive Cisco.
Part Number 10/100/1000 Ethernet Interfaces Uplink Interfaces Cisco IOS Software Available PoE Feature Set Power FlexStack-Plus Stacking WS-C2960X-48LPS-L 48 4 SFP LAN Base 370W Optional WS-C2960X-24PS-L 24 4 SFP LAN Base 370W Optional WS-C2960X-24PSQ-L 24 2 SFP, 2 10/100/1000BT LAN Base 110W No WS-C2960X-48TS-L 48 4 SFP LAN Base - Optional WS-C2960X-24TS-L 24 4 SFP LAN Base - Optional WS-C2960X-48TS-LL 48 2 SFP LAN Lite - No WS-C2960X-24TS-LL 24 2 SFP LAN Lite -
Table 27.
Table 30.
