Datasheet

© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 17
Table 3 shows switch hardware information.
Table 3. Cisco Catalyst 3560-C and 2960-C Series Compact Switch Hardware
Description Specification
Cisco Catalyst 3560-C Cisco Catalyst 2960-C
Forwarding Bandwidth 10 Gbps 10 Gbps
Flash memory 64 MB 64 MB
Memory DRAM 128 MB 128 MB
Max VLANs 1005 255
*
VLAN IDs 4000 4000
Maximum transmission unit (MTU) Up to 9000 bytes Up to 9000 bytes
Jumbo frames 9018 bytes 9018 bytes
Forwarding rate 64 Byte Packet Cisco Catalyst 3560-C
WS-C3560CG-8PC-S 13.2 mpps
WS-C3560CPD-8PT-S 13.2 mpps
WS-C3560CG-8TC-S 13.2 mpps
WS-C3560C-8PC-S 3.8 mpps
WS-C3560C-12PC-S 4.6 mpps
Forwarding rate 64 Byte Packet Cisco Catalyst 2960-C
WS-C2960CG-8TC-L 13.2 mpps
WS-C2960CPD-8PT-L 3.8 mpps
WS-C2960CPD-8TT-L 3.8 mpps
WS-C2960C-8TC-L 3.8 mpps
WS-C2960C-8TC-S 3.8 mpps
WS-C2960C-8PT-L 3.8 mpps
WS-C2960C-12PT-L 4.6 mpps
Resource Cisco Catalyst 3560-C, 2960-C Default Routing
Unicast MAC addresses 8000 4000
IGMP groups and multicast routes 250 250
Unicast routes 750 875
Directly connected hosts 250 750
Indirect routes 750 875
QoS classification ACEs 125 375
Security ACEs 375 375
Performance
VLANs 255 1005
Connectors and
cabling
Cisco Catalyst 3560-C and 2960-C with SFP-based ports:
●
10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
●
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
●
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
●
1000BASE-SX -LX/LH, -ZX, -BX, -T
*
, -FX
*
, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
●
100BASE-LX, -BX, -FX: SFP-based ports: LC fiber connectors (single/multimode fiber)
*
GLC-T and GLC-GE-100FX are not supported
For the complete list of SFPs supported, see
http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html.