Datasheet

Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 13 of 14
Ordering Information
Table 7 gives ordering information for Cisco Catalyst 2960 Series switches.
Table 7. Ordering Information for Cisco Catalyst 2960 Series Switches
Part Numbers Description
WS-C2960-8TC-L

8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has one
10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)

Compact size with no fan; magnet included

LAN Base Image installed
WS-C2960-24TT-L

24 Ethernet 10/100 ports and two 10/100/1000TX uplinks

1 RU fixed-configuration

LAN Base Image installed
WS-C2960-48TT-L

48 Ethernet 10/100 ports and two 10/100/1000TX uplinks

1 RU fixed-configuration

LAN Base Image installed
WS-C2960-24TC-L

24 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port
active)

1 RU fixed-configuration

LAN Base Image installed
WS-C2960-48TC-L

48 Ethernet 10/100 ports and 2 dual-purpose uplinks (each dual-purpose uplink port
has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port
active)

1 RU fixed-configuration

LAN Base Image installed
WS-C2960G-8TC-L

7 Ethernet 10/100/1000 ports and 1 dual-purpose uplink (dual-purpose uplink port has
one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active)

Compact size with no fan; magnet included

LAN Base Image installed
WS-C2960G-24TC-L

20 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink
port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port
active)

1 RU fixed-configuration

LAN Base Image installed
WS-C2960G-48TC-L

44 Ethernet 10/100/1000 ports and 4 dual-purpose uplinks (each dual-purpose uplink
port has one 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port
active)

1 RU fixed-configuration, multilayer switch

LAN Base Image installed
PWR675-AC-RPS-N1= Cisco RPS 675 with one connector cable
CAB-RPS-1614= 1.2m cable for Cisco RPS 675 to external device connection
CBLGRD-C2960-8TC= Cable guard for the Cisco Catalyst 2960-8TC compact switch
CBLGRD-C2960G-8TC= Cable guard for the Cisco Catalyst 2960G-8TC compact switch
RCKMNT-19-CMPCT= Rack-mount for the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches
RCKMNT-1RU= Spare rack-mount kit for the Cisco Catalyst 2960 Series
RCKMNT-REC-1RU= 1 RU recessed rack-mount kit for the Cisco Catalyst 2960 Series
GLC-LH-SM= 1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
GLC-SX-MM= 1000BASE-SX SFP transceiver module for MMF, 850-nm wavelength
GLC-ZX-SM= 1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength
GLC-T=

1000BASE-T SFP transceiver module for Category 5 copper wire

Not supported on the Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC
compact switches
GLC-BX-D= 1000BASE-BX10 SFP transceiver module for single strand SMF, 1490-nm TX / 1310-nm
RX wavelength
GLC-BX-U= 1000BASE-BX10 SFP transceiver module for single strand SMF, 1310-nm TX / 1490-nm