Datasheet

ManualsBrandsCisco ManualsNetworkingWS-C2960-48TC-S-RF

Data Sheet

Cisco Catalyst 2960 Series Switches with

LAN Lite Software

Cisco

Catalyst

2960 Series Switches with LAN Lite software are fixed-configuration,

standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring

closet and small branch office networks. The Cisco Catalyst 2960 LAN Lite Series

Switches simplify the migration from nonintelligent hubs and unmanaged switches to a

fully scalable managed network. The LAN Lite Cisco IOS

Software provides entry-level

security, quality of service (QoS), and availability capabilities while lowering the network

total cost of ownership.

The Cisco Catalyst 2960 LAN Lite Switches offer:

●

Dual-purpose uplinks for Gigabit Ethernet uplink flexibility, allowing use of either a copper

or a fiber uplink: each dual-purpose uplink port has one 10/100/1000 Ethernet port and one

Small Form-Factor Pluggable (SFP)-based Gigabit Ethernet port, with one port active at a

time

●

Scalable and secure network management

●

Baseline Network Admission Control based on users, ports, and MAC addresses

●

Easy network configuration, Cisco IOS Software updates, and troubleshooting using Cisco

Network Assistant software

●

Auto-configuration using Smartports

●

Enhanced troubleshooting for link connectivity issues and cable diagnostics

●

Quality of service and support for multicast services

●

Limited lifetime hardware warranty

●

Software updates at no additional cost

Figure 1. Cisco Catalyst 2960 LAN Lite Switches

Summary of content (12 pages)

PAGE 1
Data Sheet Cisco Catalyst 2960 Series Switches with LAN Lite Software ® ® Cisco Catalyst 2960 Series Switches with LAN Lite software are fixed-configuration, standalone switches that provide desktop Fast Ethernet connectivity for entry-level wiring closet and small branch office networks. The Cisco Catalyst 2960 LAN Lite Series Switches simplify the migration from nonintelligent hubs and unmanaged switches to a ® fully scalable managed network.
PAGE 2
Data Sheet Configurations The Cisco Catalyst 2960 LAN Lite Switches comprise the following switches (Figure 1): ● Cisco Catalyst 2960-24-S: 24 Ethernet 10/100 ports ● Cisco Catalyst 2960-24TC-S: 24 Ethernet 10/100 ports and 2 dual-purpose uplink ports (10/100/1000BASE-T or SFP) ● Cisco Catalyst 2960-48TC-S: 48 Ethernet 10/100 ports and 2 dual-purpose uplink ports; The SFP-based Gigabit Ethernet ports accommodate Cisco 1000BASE-SX, 1000BASE-LX, and 100BASE-FX SFP transceivers.
PAGE 3
Data Sheet Enhancements to the standard Spanning Tree Protocol, such as Per-VLAN Spanning Tree Plus (PVST+), UplinkFast, and PortFast, help to maximize network uptime. PVST+ allows for Layer 2 load sharing on redundant links to efficiently use the extra capacity inherent in a redundant design. UplinkFast, PortFast, and BackboneFast all greatly reduce the standard 30- to 60-second Spanning Tree Protocol convergence time.
PAGE 4
Data Sheet ● Hardware and software inventory management, centralized configuration tools, and Syslog monitoring ● Network response time and availability monitoring and tracking ● Real-time device, link, and port traffic management, analysis, and reporting Table 1 gives the features and benefits of the Cisco Catalyst 2960 LAN Lite Switches. Table 2 gives the hardware specifications, and Table 3 gives the power specifications.
PAGE 5
Data Sheet Superior Manageability ● Cisco IOS Software CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches. ● VLAN trunks can be created from any port using standards-based 802.1q tagging. ● Up to 64 VLANs per switch and up to 64 spanning-tree instances per switch are supported. ● Four thousand VLAN IDs are supported.
PAGE 6
Data Sheet Superior Redundancy for Fault Backup ® Integrated Cisco IOS Software Features for Bandwidth Optimization ● Cisco UplinkFast and BackboneFast technologies help ensure quick failover recovery, enhancing overall network stability and reliability. ● IEEE 802.1w Rapid Spanning Tree Protocol provides rapid spanning-tree convergence independent of spanning-tree timers and the benefit of distributed processing.
PAGE 7
Data Sheet Networkwide Security Features ● IEEE 802.1x allows dynamic, port-based security, providing user authentication. ● IEEE 802.1x with VLAN assignment allows a dynamic VLAN assignment for a specific user regardless of where the user is connected. ● IEEE 802.1x with voice VLAN permits an IP phone to access the voice VLAN irrespective of the authorized or unauthorized state of the port. ● IEEE 802.
PAGE 8
Data Sheet Table 2. Cisco Catalyst 2960 LAN Lite Switch Hardware Description Performance Specification ● 16 Gbps switching fabric (Catalyst 2960-24-S, Catalyst 2960-24TC-S, Catalyst 2960-48TC-S) ● Forwarding rate based on 64-byte packets: ● Catalyst 2960-24-S: 3.6 Mpps ● Catalyst 2960-24TC-S: 6.5 Mpps ● Catalyst 2960-48TC-S: 10.
PAGE 9
Data Sheet Table 3. Power Specifications for Cisco Catalyst 2960 LAN Lite Switches Description Specification Maximum Power Consumption Cisco Catalyst 2960-24-S: 30W, 103 BTUs per hour Cisco Catalyst 2960-24TC-S: 30W, 103 BTUs per hour Cisco Catalyst 2960-48TC-S: 45W, 154 BTUs per hour AC Input Voltage and Current 100-240VAC (autoranging), 1.3–0.8A, 50–60 Hz Power Rating Cisco Catalyst 2960-24-S: 0.05kVA Inrush current < 30A at 115VAC and < 60A at 230VAC Cisco Catalyst 2960-24TC-S: 0.
PAGE 10
Data Sheet Standards ● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● 100BASE-FX (SFP) ● 1000BASE-SX (SFP) ● IEEE 802.1Q VLAN ● IEEE 802.1s ● 1000BASE-LX/LH (SFP) ● RMON I and II standards ● IEEE 802.1w ● IEEE 802.1x ● SNMPv1, SNMPv2c, and SNMPv3 ● IEEE 802.1AB (LLDP) ● IEEE 802.3ad ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T specification ● IEEE 802.
PAGE 11
Data Sheet Service and Support Cisco is committed to minimizing total cost of ownership (TCO). Its portfolio of technical support services helps ensure that its products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The services and support programs described in Table 6 are available as part of the Cisco Desktop Switching Service and Support solution and are available directly from Cisco and through resellers. Table 6.
PAGE 12
Data Sheet For more information about Cisco products, contact: ● United States and Canada (toll free): 800 553- 6387 ● Europe: 32 2 778 4242 ● Australia: 612 9935 4107 ● Other: 408 526-7209 ● URL: http://www.cisco.com Printed in USA All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.