Installation guide

1-7
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-01
Chapter 1 Overview
Front-Panel Description
Figure 1-6 LEDs
System LED
The system LED shows whether the system is receiving power and functioning
properly. Table 1-3 lists the LED colors and meanings.
For information about the system LED colors during the power-on self-test
(POST), see the “Powering On the Switch and Running POST” section on
page 2-15.
SYST RPS
DUPLX
MODE
SPEED
UTILS TAT
1x
2x
3x
4x
5x
6x
52918
Mode button
Port mode
LEDs
System
LED
Port status
LEDs
RPS
LED
Table 1-3 System LED
Color System Status
Off System is not powered up.
Green System is operating normally.
Amber System is receiving power but is not functioning properly.