Datasheet

Data Sheet
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 6 of 11
Figure 3. Cisco Catalyst 3560 SFP Interconnect Cable
Product Specifications
Table 2 lists product specifications for the Cisco Catalyst 2350 Series Switches.
Table 2. Specifications for the Cisco Catalyst 2350 Series Switches
Description Specification
Switching Fabric 128 Gbps
DRAM 128 MB
FLASH 64 MB
VLANs 128
VLAN IDs 4000
Jumbo Frames 9216 B
Forwarding rate 101.2 Mpps
MAC, security, and QoS scalability numbers depend on the type of template
used in the switch:
Default
Template
Access
Template
VLAN
Template
Default
Template
Performance
MAC address 4K 12K 6K
Connectors and Cabling 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
1000BASE-SX SFP-based ports: LC fiber connectors (multimode fiber)
10GBASE-SR, CX4, LRM X2-based ports: SC fiber connectors (single-mode, or
multimode fiber)
Ethernet management port: RJ-45 connectors, 2-pair Cat-5 UTP cabling
Management console port: RJ-45-to-DB9 cable for PC connections
Power Connectors Internal power supply connector: The internal power supply is an autoranging unit.
The internal power supply supports input voltages between 100 and 240VAC. Use
the supplied AC power cord to connect the AC power connector to an AC power
outlet.
Indicators Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex
indications
System-status LEDs: system and bandwidth-utilization indications
Inches Centimeters Dimensions
(H x W x D)
Catalyst 2350-48TD 1.75 x 17.5 x 18.1 4.4 x 44.5 x 46
Pounds Kilograms Weight
Catalyst 2350-48TD 18.8 8.6