User guide

Connecting to Your TV and Stereo
A If your TV has an S-video input, then connect the S-video cable to
the Adapter’s S-video port and the TV’s S-VIDEO IN port.
If your TV does NOT have an S-video input, then connect the yellow
connectors of the RCA cable to the Adapter’s Video port and the
TV’s VIDEO IN port.
B Connect the red and white connectors of the RCA cable to the
Adapter’s Left and Right ports and the stereo’s AUDIO IN ports.
C Power on your TV. Select the TV channel or input that the Adapter will
use.
D Power on your stereo, and select the stereo input that the Adapter
will use.
E Proceed to “Step 4: Connect the Wireless-B Media Adapter to Your
Network.”
A Press the Adapter’s power
button on its front panel to
power it off.
B Unplug the power adapter
from the Adapter’s Power port
and electrical outlet.
C Unplug the Ethernet network
cable from the Adapter’s LAN
port and your computer’s
Ethernet (LAN) port.
Make sure you keep the
computer powered on
because it will communicate
with the Adapter and send
music and pictures.
D Move the Adapter and its
power adapter to the TV.
E If you have a stereo, go to the
“Connecting to Your TV and
Stereo” section.
If you do not have a stereo, go
to the “Connecting to Your TV
Only” section.
N The Wireless Security Settings
screen will appear. To enable
WEP encryption, select a level
of WEP encryption, 64-bit or
128-bit, and enter a
Passphrase. If you want to enter
the WEP key manually, then
complete the KEY #1 field.
To disable WEP encryption,
keep the default, Disabled.
Click Next.
O Review your settings on the
Confirmation screen. To save
your new settings, click Save.
P On the Congratulations
screen, click Exit. The Wireless-B
Media Adapter is now properly
configured.
Model No.
Connect the Wireless-B Media
D The Adapter Utility on your PC
will automatically find the
Adapter on your wireless or
wired network. Then the main
menu of the Media Navigator
will appear on your TV. (This
may take a few seconds.)
E Insert the batteries into the
remote control, and use the
arrow and Select buttons to
select songs and pictures.
Congratulations! The installation of
the Wireless-B Media Adapter is
complete.
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
[e-mail]
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2003
Cisco Systems, Inc. All rights reserved.
WMA11B-QI-30905E JL
4
N
P
3
Connect the Wireless-B Media
Adapter to Your TV and Stereo
C
B
D
Connecting to Your TV Only
A If your TV has an S-video input, then connect the S-video cable to
the Adapter’s S-video port and the TV’s S-VIDEO IN port.
If your TV does NOT have an S-video input, then connect the yellow
connectors of the RCA cable to the Adapter’s Video port and the
TV’s VIDEO IN port.
B Connect the red and white connectors of the RCA cable to the
Adapter’s Left and Right ports and the TV’s AUDIO IN ports.
C Power on your TV. Select the TV channel or input that the Adapter will
use.
D Proceed to “Step 4: Connect the Wireless-B Media Adapter to Your
Network.”
If the Adapter will connect to your
computer through your wireless net-
work, start with step B. Otherwise, start
with step A.
A If the Adapter will connect to
your PC through your wired
network, then connect the
Ethernet network cable to the
Adapter’s LAN port and an
Ethernet (LAN) port on a wired
network device, such as a
router or switch.
B Connect the power adapter to
the Adapter’s Power port and
an electrical outlet.
C Press the Power button on the
Adapter’s front panel.
If the Adapter connects to your
wireless network, the Wireless
LED will light up. Go to step D.
If the Adapter connects to your
wired network, the Ethernet LED
will light up. If it does not, then
push the Uplink button on the
Adapter’s back panel. Power
the Adapter off and back on
again. Make sure the cable
connections are secure.
Adapter to Your Network
B
NOTE: The Adapter’s WEP settings must
match the WEP settings of your existing
wireless network.
O
NOTE: If your TV and stereo are located far apart from each other, you may
have to use a separate RCA cable for the audio connections described in
step B.