Product specifications

The work around in this release of CCA 1.0 - 1.6 is to apply ACL's on the UC500 or on the 526 controller. Create the ACLs on the
controller as shown in the example below:

Web Authentication lockout
STEP 1. Start WWW browser on SE Laptop and browse to https:// 1.1.1.1/login.html .You will get a redirect to the web
authentication page
STEP 2. At the WebAuth login screen, login using the “guest” User Name however, use an incorrect password 4 times.
STEP 3. After the fourth try, you will you will not be able to login.
STEP 4. In WLC Web UI interface go to Monitor mode and in Client Summary you should see Excluded Clients.
STEP 5. Within 20 seconds, the SE Laptop will not be associated with the AP.
STEP 6. From the MONITOR > Wireless Clients, remove the client from the Excluded list. Remove this client by choosing
Remove in the Command drop down box.
STEP 7. Start WWW browser on SE Laptop or PDA , and the WebAuth login screen should appear and clients should be able to
login as Guest user
STEP 8. Lastly you can create a user as “Lobby Administrator” that has rights to create guest users only on the Controller. Lobby
Administrator would need access to the Controller WebUI interface to create guest users with scheduled network access.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 77 of 95