Product specifications

STEP 10. Verify that client appears on the WLAN Controller’ client list as Associated and Authenticated.
STEP 11. Click on the Monitor > Report > Wireless Client link to view associated client detail table. Guest clients should show as
associated in the table with configured Guest profile.
Note When setting up a guest VLANs, there is no separation applied between the VLANs in this release, meaning that if
guest user logs on through your controller it can access any subnet in use on the UC500, if one is implemented on your network (e.g.
your data vlan, voice vlan, etc….) by connecting to the guest network's default gateway.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 76 of 95