Product specifications

STEP 6. And finally use the connection status tab to see the client IP address and other connectivity parameters as indicated in the

screen shot below. The client received IP address fro the DHCP server on the UC 500 on VLAN 10.

Wireless connectivity with UC 520 AP - Secure connectivity using MS Zero Config Supplicant

Next we can demonstrate setup with WPA/PSK on the hand held device. We will initially configure the Intermec CN-3 device with

the Microsoft Wireless Zero Config supplicant that comes native on the Windows Mobile Device.

Note You can use any PDA or a Hand Held device that runs Windows CE Mobile if you don’t have Intermec device for

this demonstration

Note MS Zero config supports PEAP authentication however, Local Radius server on the UC520 supports only LEAP

and EAP-FAST authentication methods therefore we cannot demonstrate PEAP with Windows Mobile.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 47 of 95