Product specifications

In this demonstration we will use variety of wireless cards and supplicants and to make demo more interesting and to explore rich set
of the security capabilities of the Mobility Express controller in combination with the UC 520 we will demonstrate several different
security setups ( as shown in the previous section) with different clients. This demonstration will further enforce the security
capabilities of the SMB system and its interoperability with a wide variety of wireless clients and supplicants. During the
demonstration you may pass the wireless clients and handhelds to the customers.
Demo Demo
Duration
Demo Description
Laptop with CB 21AG card and
Cisco ADU
3 min Wireless client setup with the Cisco PC Bus 802.11 a/g card and Cisco ADU supplicant .
Demonstrate connectivity to WLC LAP with WPA2/AES and EAP-FAST
Laptop with 350 card and ACU
supplicant
3 min Wireless client setup with Cisco 350 802.11b card and ACU
Demonstrate connectivity to IOS AP with EAP-FAST and Dynamic WEP
Laptop with CB 21AG card CSSC
4.2 Supplicants
3 min Wireless Client setup with Cisco card and Cisco Security Services Client Version 4.2
Demonstrate connectivity to IOS AP with LEAP and Dynamic WEP.
Laptop with Cisco CB 21AG card
and CSSC 5.0 Supplicant
3min Wireless Client setup with Cisco card and Cisco Security Services Client Version 5.0.
Demonstrate connectivity with WPA/PSK.
Intermec Hand Held Device with
Funk Odyssey Supplicant and MS
Zero Config
3 min Intermec CN-3 Mobil device with Broadcoam Wireless Card and Funk Odyssey client
Demonstrate connectivity with WPA-PSK using Zero Config and WPA2/AES and EAP-FAST using
Odyssey supplicant
Cisco 7921 Wireless Phone 3 min Cisco 7921 Wireless IP phone with VoIP
Nokia Dual Mode Phone 3 min Nokia Dual Mode Wireless Phone.
Wireless Client connectivity with UC520 integrated AP - Secure connectivity using CSSC supplicants.
We will demonstrate setup with WPA-PSK on the laptop using lately released CSSC version 5.0
STEP 1. Using CCA 1.6, in the Configure Wireless Networks tab configure SSID=smbdata with security WPA-PSK and
PSK=sbcsdata or 1234567890; PSK key has to be at least 8 characters long.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 42 of 95