Product specifications

Note:
Power Level The transmit power level of the access point where
1 = Maximum power allowed per Country Code setting, 2 = 50% power, 3 = 25% power, 4 = 6.25 to 12.5% power, and 5 = 0.195 to 6.25%
power
Note The power levels and available channels are defined by the Country Code setting, and are regulated on a country by country basis.
STEP 8. Connect AP back to the Ethernet port and you should be able to observer changes in Power Levels.
Note This demonstration works the best if at least 3 APs are being used.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 36 of 95