Product specifications

STEP 9. The Wireless Tab allows you to configure Wireless setting on the UC520 device for the Stand- alone AP(s) and on
the WLC 526 for the Controller Mode configuration.
Note This setting is the same as if you would choose a Wireless Networks Configuration on the left side Config Wireless Tab.
Several other Tabs on the Horizontal Menu are a repeat of the configuration options available on the Left Side Menu options.
STEP 10. Next Tab is the setting to configure the Smart Ethernet ports on the UC 520 or CE 500 if one is available.
STEP 11. The next Tab is the Ethernet Port Setting tab on the UC 520 with options to set filters on each port and set the speed
of the ports.
STEP 12. The tab is the Inventory Tab , it provides a detailed list of the devices and their settings.
STEP 13. The next tab is the Health Tab, same as the Monitor tab on the laft side menu and shows the performance of the
system.
STEP 14. The Tab is the event notification tab, also same as Monitor Health Tab on the left side menu.
STEP 15. Next Tab is the Front View Menu Tab of the devices in the SBCS network.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 33 of 95