Product specifications

STEP 12. Next lets take a look at the Monitor>System Messages tab – if there are any rogues AP in the surrounding environment
and not configured on you network the system will display them as Rogue APs. You may also setup a Message Filter or
Save/Print the system messages report.
Note The error messages displayed on the display will vary from site to site.
Converting 521 AP from Standalone to Controller mode LAP
STEP 13. Under Configure>Wireless>Convert To LAP…> you can convert any or all Standalone 521 APs to a Controller Mode
LAPs. You can demonstrate that there is a standalone 521 AP connected to the SBCS demo network and that AP can be
converted to the LAP.
Note Do not proceed with the conversation process during the demonstration. In addition you will have to
verify that the Standalone 521 AP is part of the SBCS-demo community, otherwise the <Convert To LAP…> will not
show up under the <Wireless> menu option.
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 30 of 95