Product specifications

STEP 2. Open the <Configure>< Smartports menu tab, you will see the UC500 displayed on the screen with Ethernet Smartports
highlighted on the display. By clicking on the Port and then on the Modify button will show the configuration options for
the port. Note that in our demo the port where the APs are connected configured as Access Point ports with default VLAN.
STEP 3. Next in the Configure menu choose VLANs – you will see VLANs configured on our network under the hostname
UC520-demo and hostname New526-demo
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 22 of 95