Product specifications

Verify AP Registration

STEP 1. In the topology view verify that all the components are present and all the devices show MAC address and IP addresses.

You can change the setting of what is shown on the screen in the Topology Preference Setting.

STEP 2. Open the Monitor>Reports> Wireless Radios menu and see all the APs connected to the controller and their Channel and

Transmit power assignments.

Note The AP Mac address entries will vary in every demo. Channels and Transmit power may be different as well

Verifying Clients Association

STEP 1. On the left side pull down menu choose Monitor>Reports>Wireless Clients and you will see all the Wireless clients

associated and authenticated to the APs.

CCA features on the Topology View Screen

STEP 1. Double click on any Device icon on the screen and see the detailed device information or you can change devices name, get

code version loaded on the device and write annotations.

STEP 2. On the top menu of the Topology view there are Topology Icons for Changing layout, Saving Topology or Topology

Options. One of the nice features is the ability to set colors for the VLAN of the SBCS network.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 20 of 95