Product specifications

STEP 6. While the APs reload, point out the APs which are receiving the operating system and configuration from the Wireless
LAN Controller. Once the 521 LAP is registered, solid LEDs for the power (green) will be displayed for Registered AP
STEP 7. Return to the CCA Topology screen and verify there are 3 APs registered (or as many as available). If only 2 APs are
registered, click the refresh button to see the third. This process again may take several minutes.
STEP 8. Now go to Monitor > Wireless Clients and you should see all the wireless clients registered to the APs
STEP 9. Show the customer that LAP 521 or controller-mode AP icon has a triangle and the AAP or stand alone AP icon has a
circle.
Key Features
© 2008 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 11 of 95