User Manual

Setting Up the Cisco WAP4410N Wireless-N Access Point

Navigating the Utility

WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide 22

• Log—Configures the log settings.

• Diagnostics—Allows you to perform diagnostic activities, which can be

useful in solving network problems.

• Factory Default—Resets the access point to its factory default settings.

• Firmware Upgrade—Upgrades the access point’s firmware on this screen.

• Reboot—Reboots the access point.

• Configuration Management—Saves and restores access point

configuration.

• SSL Certification Management—Exports or installs an SSL Certificate.

Status

This page allows you to view status information about your local network, wireless

networks, and network performance.

• Local Network—Displays system information, including software and

hardware versions, MAC address, and IP address on the LAN side of the

access point.

• Wireless—Displays wireless network settings including SSID, network

mode, priority setting, VLAN trunk, and wireless channel.

• System Performance—Displays the current traffic statistics of this access

point for both wireless and LAN ports.