User guide

Advanced Functions
Using Star Codes
Cisco WIP310 User Guide 74
4
Using Star Codes
The WIP310 supports numerous “star codes: to access phone supplementary
services. These codes, which start with *, are entered before dialing a telephone
number and provide services. For example, to block caller ID (star code 67), you
would dial *67, followed by the telephone number you are calling.
Following is a list of supported star codes:
Code Definition
98 Perform a blind call transfer. See Transferring a Call, page 46.
86 Deactivate Call Back.
72 Activate Call Forward All. See Setting Up Call Forwarding, page 52.
73 Deactivate Call Forward All.
90 Activate Call Forward Busy. See Setting Up Call Forwarding, page 52.
91 Deactivate Call Forward Busy.
92 Activate Call Forward No Answer. See Setting Up Call Forwarding,
page 52.
93 Deactivate Call Forward No Answer.
56 Activate Call Waiting. See Configuring Call Waiting, page 50.
57 Deactivate Call Waiting.
71 Activate Call Waiting for a single call.
70 Deactivate Call Waiting for a single call.
67 Activate Caller ID Blocking. See Blocking Caller ID, page 52.
68 Deactivate Caller ID Blocking.
81 Activate Caller ID Blocking for a single call.
82 Deactivate Caller ID Blocking for a single call.
77 Activate anonymous call blocking. See Blocking Anonymous Calls,
page 51.