User guide

ManualsBrandsCisco ManualsConsumer electronicsWIP310 - iPhone Wireless VoIP Phone

Chapter 4

Advanced Functions

Wireless-G IP Phone

Chapter 4: Advanced

Functions

This chapter contains information about advanced phone

functions.

WARNING: Do not edit any of the advanced

phone settings described in this chapter unless

directed to do so by a technical support person

from your Internet Telephony Service Provider

(ITSP) or your Value Added Reseller (VAR).

Enabling the Web Server

Enabling the web server allows the phone to be configured

using a web browser.

NOTE: Most phone configuration is done using

the phone. However, enabling this setting

allows system administrators to use the web

browser to configure advanced settings.

To enable the web server:

Settings > Misc Settings

In the Home screen, press the 1. Select button to choose

Settings.

Press the 2. Select button and scroll to navigate to Misc

Settings.

Press the 3. Select button to see the Misc Settings

options.

To Enable Web Server, press the 4. Left or Right Arrow

key to select ON or OFF.

Press the 5. Select button (check mark icon) to confirm

or press the Cancel soft key to exit without changes.

Press the Back soft key to move back one screen. Press the

Power/End Call button to return to the Home screen.

Using the Web Interface

Obtain the IP address of your phone by pressing the 1.

Options softkey. Scroll to Phone Info and press the

Select button.

On your PC, open Internet Explorer.2.

Enter the IP address of your phone in the browser’s 3.

toolbar.

4. The Info page of the Wireless-G IP Phone Web Interface

displays.

You can configure some of your phone settings, such

as call forwarding and Do Not Disturb, using the web

interface. See the sections on those settings in this guide

for more information.

Using Star Codes

The WIP310 supports numerous “star codes” to access

phone supplementary services. These codes, which start

with *, are entered before dialing a telephone number

and provide services. For example, to block caller ID (star

code 67), you would dial *67, followed by the telephone

number you are calling.

Following is a list of supported star codes: